Assembly Of Main Barbecue

Fit Cooking Plates And Grates

We recommend fitting the plate to the left-hand side of the barbecue frame (with the drain hole to the extreme left). The grates can be fitted to the right hand side of the barbecue frame. The grates must always be positioned over the Vaporizers.

The 4+1 burner model comes standard with a 320mm plate, a 330mm grill and a 161mm grill. You may use other combinations of cooking surface, however,

the plate may cover no more than 50% of the total cooking area .

The 5+1 burner model comes standard with one third plate and one two thirds gate and are approved for use with a maximum of two thirds plate.

Do not cover the entire surface of the barbecue frame with plates as this will cause severe heat damage to the appliance.

Fit The Warming Rack

The warming rack needs no screws. It sits on two notches on the insides of the hood.

6