VINTAGER AC112
TABLE OF CONTENTS
1. INTRODUCTION | 6 | ||
1.1 | Design concept | 7 | |
| 1.1.1 | ULTRATUBE technology | 7 |
1.2 | Before you begin | 7 | |
1.3 | Control elements | 8 | |
| 1.3.1 | Front panel | 8 |
| 1.3.2 | Rear panel | 10 |
2. | WIRING EXAMPLES | 11 | |
| 2.1 | Standard setup consisting of guitar, footswitch and external effects device | 11 |
| 2.2 | Expanded setup with MIDI foot controller, playback source and mixing console | 12 |
3. | EFFECTS PROCESSOR | 13 | |
| 3.1 | Description of effects | 13 |
| 3.2 | Controlling the VINTAGER via MIDI | 22 |
|
| 3.2.1 Store Enable mode | 23 |
4. | HISTORICAL BACKGROUND by Neville Marten (Guitarist Magazine) | 23 | |
5. | INSTALLATION | 24 | |
| 5.1 | Mains connection | 24 |
| 5.2 | Audio connections | 24 |
| 5.3 | MIDI connection | 25 |
6. | APPENDIX | 25 | |
| 6.1 | Preset list | 25 |
| 6.2 | MIDI implementation | 28 |
7. | SPECIFICATIONS | 29 | |
8. | WARRANTY | 30 | |
WARNING!
+It should be pointed out, that extreme output volumes may damage your ears and/or your headphones. Turn down all LEVEL controls before you switch on the unit. Always pay attention to an appropriate volume.
5
