Behringer X32 Effects Processing, Matrix Channels, Mix Bus Channels

10X32 COMPACT DIGITAL MIXER User Manual

LeOnde.mp3		13:44:43				MyProj.prj
00.05.00	00.00.00	29 November 2010				Scene01
home	con￿g	gate	dyn	eq	sends	main

clip	Bus Con￿guration			Bus Insert Position
		Channel Sends	∑
-6
-12
-18
	Link		Pre		Insert	Post
-24
-30	All Channel Sends						Insert
-36
-42	Pre Con￿guration					Ins 01
-48		...				Ins 02
-54		Inputs				Ins 03
		Pre EQ				Ins 04
		Pre Fader				...
		Post Fader				FX 01
		Sub Grou				FX 02

Gain	Send Pos.	Insert Pos.	Insert
00.00 dB	Inputs	Pre
Link	Bus Sends	Insert	Connect

The configuration of Mix Bus Channels 1-16can be pre-set (in the Setup/Global page) or can also be configured on an individual, per-channel basis. The bus processing includes (in this order):

•Insert point (swappable between post-EQ and pre-EQ operation)

•6-band fully parametric EQ

•Compressor/expander (swappable between post-EQ and pre-EQ operation)

•Bus sends to 6 matrices

•Main LR panning

•Mono/Center level

Main Bus Channels LR/C are always available and independent from Mix Buses. The processing steps for this signal path include (in this order):

•Insert point (swappable between post-EQ and pre-EQ operation)

Matrix Channels 1-6are fed exclusively by MAIN LRC and Mix Bus 1-16 signals. The processing steps include (in this order):

•Insert point (swappable between post-EQ and pre-EQ operation)

•6-band fully parametric EQ

•Compressor/expander (swappable between post-EQ and pre-EQ operation)

Effects Processing 1-8

The X32 COMPACT console contains eight true-stereo internal effects engines.

•FX 1-4 can be configured as side chain or insert effects, while FX 5-8 can only be used in insert points of channels or buses

•The returns of side chain FX 1-4 can always be controlled using the 6th bank (layer) of the input channels - Effects Returns. Note that the return signals of FX 1-4 have separate faders for left and right

•	6-band fully parametric EQ	• The FX Home screen allows selection of the FX 1-4 input sources and selecting
•	Compressor/expander (swappable between post-EQ and pre-EQ operation)	the effects type/algorithm for each of the 8 FX slots of the virtual rack
		• The subsequent tabs FX 1-FX 8 of the FX screen allow editing all parameters
•	Bus sends to 6 matrices
		of the chosen effects processor