48X32 COMPACT DIGITAL MIXER User Manual

7.4.3Routing Screen: Aux Out Tab

The route screen’s aux out tab allows the user to patch an internal signal path (such as a mix output used as an effects send) to the 6 separate ¼"/RCA auxiliary outputs.

Since these six outputs can have a wide variety of signal paths assigned to them, they can be used for a wide variety of tasks, such as:

1.Feeding an external effects processor when the internal effects are insufficient

2.Patching a specific console signal path into an outboard recorder

3.Feeding the analog or digital audio inputs of a nearby video recorder To make an assignment as described above, perform the following steps:

4.Adjust the 1st encoder to select which auxiliary outputs to assign a source for. Choices include:

•Aux Out 1

•Aux Out 2

•Aux Out 3

•Aux Out 4

•Aux Out 5

•Aux Out 6

•AES/EBU (Digital) Out L

•AES/EBU (Digital) Out R

5.Adjust the 3rd encoder to select for coarse range

•Insert

•Main (LRC)

•Mix Bus

•Matrix

•Direct Out

•Monitor

6.Adjust 4th encoder to select specific signal path to feed the selected physical output. Choices include:

•Insert Point

•Main L

•Main R

•Main C/M

•Any of the 16 Mix Outputs

•Any of the 6 matrix outputs

•Any of the 32 direct outputs

•Any of the 8 Auxiliary Outputs

•Any of the FX Direct Outputs

•Monitor L

•Monitor R

•Talkback

7.Tap the 4th encoder to assign the selected output path, completing the process.

8.Adjust the 5th encoder to select the signal tap point for the output assignment. Choices include:

•Input

•Pre-EQ

•Pre-Fader

•Post-Fader

9.Tap the 5th encoder to complete the signal tap point assignment.