44X32 COMPACT DIGITAL MIXER User Manual

7.2.6Home Screen: Sends Tab

The sends tab displays and controls all aspects of the channel sends to the sixteen mix buses. Compared to the dedicated top panel send controls, this screen offers additional functions such as send muting and simultaneous metering of the selected channel’s sixteen sends. This tab can also be accessed directly by pressing the “View” button in the top panel sends section.

The sends tab contains the following parameters that can be adjusted using the six rotary-push encoders:

Page 1

1.Adjust the 1st encoder to set the level for the first send of the currently selected four-send group.

2.Tap the 1st encoder to mute the first send of the currently selected four-send group.

3.Repeat process with the next three encoders for the other three sends in the currently selected four-send group.

4.Adjust the 6th encoder to select which four sends to control with the screen encoders, shifting focus two sends at a time.

5.Tap the 6th encoder to select which four sends to control with the screen encoders, shifting focus four sends at a time.

Page 2

1.Adjust the 1st encoder to select where in the signal chain the send is tapped from, for the first two sends of the currently focused four sends. Options include:

•Pre-EQ

•Post-EQ

•Pre-Fader

•Post-Fader

•Sub-Group

2.Adjust the 3rd encoder to perform the same operation for the second two sends of the currently focused four sends.

3.Adjust the 6th encoder to select which four sends to control with the screen encoders, shifting focus two sends at a time.

4.Tap the 6th encoder to select which four sends to control with the screen encoders, shifting focus four sends at a time.

7.2.7 Home Screen: Main Tab

The main tab displays and controls all aspects of the main bus assignments.

The main tab contains the following parameters that can be adjusted using the six rotary-push encoders:

1.Adjust the 1st encoder to pan the selected channel within the main stereo output.

2.Tap the 1st encoder to assign the selected channel to the main stereo output.

3.Adjust the 2nd encoder to adjust the level of the currently selected channel within the mono (center) bus.

4.Tap the 2nd encoder to assign the selected channel to the mono output signal path. Use this function when crafting an LCR mix as opposed to a mono or stereo mix.

5.Tap the 5th encoder to solo/unsolo the currently selected channel.

6.Adjust the 6th encoder to set the fader level for the currently selected channel.

7.Tap the 6th encoder to mute/unmute the currently selected channel.