Behringer X32 Output Signals, FX Return Channels 1L-4R control the 4 stereo output signals of side-chainFX, Aux Return Channels

9X32 COMPACT DIGITAL MIXER User Manual

Ch01

01

01:

0:00

- 0:00

B:

-

C: X-USB

14:09 : 37

A: S16

A: 48K

home

analog out

aux out

p16 out card out

aes50-a aes50-b

Edit Output Assignment

Analog Output

Current Setting

Category

Processed Output

Signal Tap

Output 01

MixBus

OFF

OFF

Pre EQ

ft

0.3

Output 02

Main (LRC)

Main L

Post EQ

0.10

m

Output 03

Mix Bus

Main R

Pre Fader

Output 04

Matrix

Main C/M

Post Fader

0.3

ms

Output 05

Direct Out

Main Bus 01

Output 06

Monitor

Main Bus 02

Output 07

Main Bus 03

Delay

Output 08

Main Bus 04

*Output 09

Main Bus 05

*Output 10

Main Bus 06

*Output 11

Main Bus 07

*Output 12

Main Bus 08

Delay

*Output 13

Main Bus 09

*Output 14

Select

Select

Select

Select

Delay

0.3

ms

Assign

Set

Delay

Output Signals can be freely assigned from any internal signal to any of the following outputs:

•8 analog local XLR outputs (with adjustable digital delay for time-alignment of speakers)

•8 virtual outputs (marked with *) for routing over AES50 or card outputs

•6x auxiliary sends on ¼" TRS outputs + 2x AES/EBU outputs

•16 channels of personal monitoring using the console’s P-16 Bus output connector

Any and all of the above signals can also be mirrored in blocks of 8 signals on either one of

•48x channels on AES50 port A

•48x channels on AES50 port B

•32x channels on USB interface card

Ch01	01 01:			0:00	- 0:00	B: -	C: X-USB		14:11 : 37
						A: S16	A: 48K
	home	con￿g		gate	dyn	eq	sends		main
						Insert Position
clip				In	t
-6	48V
-12	Reverse
-18
					Delay	Pre	Ins	Post
-24
					0.3	ft
-30	Link	Lo Cut		Source					Insert
-36				OFF	0.10	m		OFF
-42	+0.0 dB	2.0	Hz	Input 01	0.03	ms		InsFX 1L
-48				Input 02				InsFX 1R
-54				Input 03				InsFX 2L
	Gain	Lo Cut		Input 04	Delay			InsFX 2R
				Input 05				InsFX 3L
				Input 06				InsFX 3L
Gain		Lo Cut		Source	Delay		Ins Pos		Insert
+0.00 dB		20	Hz	Input	0.3 ms		PRE		InsF
Link		Lo Cut		Select	Delay		Insert		Connect

Input Channels 1-16are pre-configured to use the local input signals 1-16, but can be patched to use any other available signal on the audio engine as well, including mix bus/sub group outputs. Changes of the Channel Source can be made on the Preamp Config page.

Input Channels 17-32are pre-configured to AES50 A inputs 1-16, so that connecting an S16 stage box to port A will automatically feed the channels.

Aux Return Channels 1-8are pre-configured to use the 6 aux input signals, and the two USB playback outputs, but can be patched to use any other available signal of the console as well.

FX Return Channels 1L-4R control the 4 stereo output signals of side-chain FX 1-4.