Beko 28C769IDS Connecting a decoder, Decoder, Via SCART, Via PHONO lead Model Dependant

Connecting a decoder

Via SCART

Make sure the TV and decoder are both switched off. Plug one end of the SCART lead (not supplied) into the back of the decoder and the other end into the SCART1 on the back of the TV. Switch on the decoder and the TV. Press the » AV « button on the remote control to select AV1.

Via PHONO lead (Model Dependant)

Make sure the TV and decoder are both switched off. Plug one end of the PHONO lead into the video and audio out sockets on the back of the decoder and plug the other end into the video and audio in sockets on the TV.

AV

Press the » « button repetitively and select the AV3 mode for two scart models or select

30AV4 mode for three scart models.

Please Note

You can record from one external piece of equipment to another via the TV by connecting the playback to SCART 1 and the recorder to SCART 2 or SCART 3 and selecting AV1. You cannot watch the TV.

You can connect NTSC supported equipment to the TV via the SCART sockets and adjusting the colour via the PICTURE menu.

Select TINT by using »« button and use the adjust the colour to » « or » « buttons.

R

L

MONO

VIDEO

R

AUDIO OUT

LAV3

AV1

AV2

		ANTENNA IN	VIDEO OUT
		R		AV 1	TV	110-240 V~
						50/60 Hz 35 W
		L
OUT	TV	DIGITAL AUDIO AUDIO OUT	S-VIDEO OUT	EURO AV 2	DECODER
		OUT

DECODER