Beko 28C769IDS Connection/Preparation, In the box, Inserting batteries into the remote control

CONNECTION/PREPARATION

In the box

Inside this package you should have:

Television,Remote control,User guide, AAA batteries x 2

Read these instructions before use.

Connecting the aerial and the mains cable

	Plug the cable of the outdoor or indoor							aerial
	(passive	or	active indoor			aerial with its	own	power
	supply)	into	the	aerial	socket » « of the television set.
	Please note:
	When connecting			an	indoor aerial, you		may have
6	to try	it out at different positions until you get the best
	reception.
	Connect the TV mains plug into your domestic mains socket
	outlet. (230V 50Hz A.C.)
	Please note:
	Only plug the TV into the mains socket after you have
	connected the external					equipment and	the	aerial.

Inserting batteries into the remote control

Open the battery compartment by removing the lid.

Insert the batteries (Mignon type, for example UM-3 or AAA, 2x1,5V). Observe the polarity (marked on the base of the battery compartment).

Close the battery compartment.

+-

- +

Note:

If the television no longer reacts properly to remote control commands, the batteries may be flat. Be sure to remove used batteries. The manufacturer accepts no liability for damage resulting from used batteries.

Environmental note

Batteries, including those which contain no heavy metal, may not be disposed of with household waste. Please dispose of used batteries in an environmentally sound manner. Find out about the legal regulations which apply in your area.