- English
Repeat Steps 4 and 5 until you have filled in all
parameters.
✎You can get the network parameter values
from your Internet provider.
When finished entering all the parameter
values, select ('), and then press the
v button. The home cinema verifies the
network connection and then connects to the
network.
You can set up a wireless network connection in
three ways:
-Wireless Automatic
-Wireless Manual
-WPS(PBC)
Before you configure the wireless network
connection, disconnect any wireless network devices
currently connected to the product or, if applicable,
the product's current wired connection.
Ğ
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 20)
In the screen, change
to . The product searches
for and then displays a list of the available
networks.
Network Settings
Select your network type.
Network Type Wireless
Wireless network
m Move " Select ' Return
You can connect your BD
Home Theater to the
internet. Please select which wireless
network to use.
WPS(PBC) Search
si-ap
MIC
KIMING_VTOWER
Select the desired network, and then press the
v button.
On the screen, enter your network's
security code or pass phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with ▲▼◀▶ buttons, and
then pressing v button.
When finished, select , and then press the
v button. The product verifies the network
connection and then connects to the network.
✎You should be able to find the security code or
pass phrase on one of the set up screens you
used to set up your router or modem.
Ğ
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
values manually.
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 20)
In the screen, change
to . The product searches
for and then displays a list of the available
networks.
Scroll through the list, select the desired
network or , and then press the
v button.
If you selected a network in Step 2, go to Step 6.
If you selected , go to Step 4.
Enter your wireless network or wireless router's
name.
Enter numbers directly using the number
buttons on your remote control.
Enter letters by selecting a letter with the
▲▼◀▶ buttons, and then pressing the v
button.
To display capital letters (or redisplay lower
case letters if capital letters are displayed),
select , and then press the v button.
To display symbols and punctuation, select
, and then press the v button. To
redisplay letters, select , and then
press the v button.
When finished, select , and then press the
v button.
On the Security method screen that appears,
use the ▲▼ buttons to select the network's
Security method, and then press the v
button. On the next screen, enter your
network's security code or pass phrase.
Enter numbers directly using the number
buttons on your remote control.
Enter letters by selecting a letter with the
▲▼◀▶ buttons, and then pressing the v
button.