- English
Settings
For more information about this function see
page 23.
Provides contact information for assistance with
your product.
View the general disclaimer regarding third party
contents and services.
Reverts all settings to their defaults except for the
network. Requires that you enter your security
PIN. The default security PIN is 0000.
Network Setup
When you connect this product to a network, you
can use network based applications and functions
such as BD-LIVE and upgrade the product's software
through the network connection.
To begin configuring your network connection,
follow these steps:
In the Home screen, select , and then
press the v button.
Select , and then press the v button.
Select , and then press the v
button.
Go to the instructions for Wired networks
starting below or the instructions for Wireless
networks. (See page 21)
Ğ
After following Steps 1 to 3 above:
In the screen, change
to . Then, select
and press the v button. The product detects
the wired connection, verifies the network
connection, and then connects to the network.
When it is done, highlight , and then press
v button.
Ğ
If you have a static IP address or the automatic
procedure does not work, you'll need to set the
values manually.
After following Steps 1 to 3 above:
In the screen, change
to . Then, select
and press the v button.
The product searches for a network, and then
displays the connection failed message.
✎If it is possible to connect the home cinema
to your network wirelessly, select
at this point, change the
to , and then go to the
instructions for wireless networks. (See page
21
)
Network Settings
MAC Address XX:XX:XX:XX:XX:XX
IP Address 0. 0. 0. 0
Subnet Mask 0. 0. 0. 0
Gateway 0. 0. 0. 0
DNS Server 0. 0. 0. 0
a Previous d Skip < Move " Select
IP auto setting failed. Try the following to set up the IP automatically, or set up the IP manually
by selecting IP Settings.
-
Ensure that the DHCP server is enabled on the wireless network, then unplug and plug the wireless
network in again.
- Contact your internet service provider for more info.
Wired network connection failed.
Change Network IP Settings Retry Close
Use the ◀▶ buttons to select , and
then press the v button. The
screen appears.
Select the field, and then set it to
.
Select a parameter to enter (, for
example), and then press v. Use the number
keypad on your remote control to enter the
numbers for the parameter. You can also enter
numbers using the ▲▼ buttons. Use the ◀▶
buttons on the remote control to move from
entry field to entry field within a parameter.
When done with one parameter, press the v
button.
Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 4.