- English
Playing Content
✎NFC connection works even when the Home
Cinema is turned off, if is set
to . However, NFC connection will work
only after the Home Cinema is turned on if
the power cord had been disconnected and
reconnected.
✎The is a trademark or
registered trademark of NFC
Forum, Inc. in the United States
and in other countries.
✎NFC tagging for Bluetooth
connection cannot be
established while powering on
and off.
✎NFC tagging for Bluetooth connection will not
work while the battery indicator is blinking.
Using the Special Effects Remote
Control Buttons
DSP/EQTV SOUND
If you have a TV that supports Anynet+ (HDMI-
CEC), the button lets you direct the
TV's audio to the Home Cinema Speakers or the
TV Speakers. To use, follow these steps:
Connect an HDMI cable to the TV and home
cinema. (See page 13)
Set in the home
cinema and TV.
Press the button on the remote
control. flashes on the display
on the front panel, and then changes to
When TV SOUND is on, TV audio outputs
through the Home Cinema speakers.
Press the button again to turn TV
SOUND off.
When TV SOUND is off, TV audio outputs
through the speakers of the connected
Anynet+ TV.
Ğ
1) When you want to listen to the TV's audio
through the home cinema speakers.
2) When you want to listen to the audio from a
USB device plugged into the TV through the
home cinema speakers.
Ğ
HTS Speaker
Output
HTS Speaker
Mute
TV Speaker
Mute
TV Speaker
Output
HTS Speaker
Output
HTS Speaker
Mute
TV Speaker
Output
TV Speaker
Output
HTS Speaker
Output
HTS Speaker
Mute
TV Speaker
Output
TV Speaker
Output
DSP/EQ
TV SOUND
You can enjoy various sound mode.
z: Select for normal listening.
z: Reproduces realistic and powerful
sound for movie sources.
z: Suitable for whole music sources.
z:Suited for playing video games and
produces powerful sound.
z: Produces surround
sound for 2 channel input sources.
z: Reinforce bass sound effect.
z: Improves bass sound characteristics
according to output level.
z: Optimizes to night by compress
dynamic range (soft sound).