- English
Appendix
Press and hold the 5 button on front panel for more than 5 seconds with no
disc in the product. All settings will revert to their factory settings.
Check the connection between the TV and the HDMI jack of the product.
Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.
If random noise appears on the screen, it means that TV does not support HDCP
(High-bandwidth Digital Content Protection).
DLNA shows only Photo, Music, and Movie files. It does not display other kinds
of files.
Check if the network is stable.
Check if the network cable is properly connected and if the network is
overloaded.
IP addresses under the same subnetwork should be unique, otherwise IP collision
can cause an unstable connection.
Check if you have a firewall enabled.
If so, disable the firewall function.
Test whether the network connection is active by using the
function.
Check whether a USB memory device is connected to the product.
The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in . (See page 40)
See if the option is set to .
If all above fails, contact the contents provider or update to the latest firmware.
The USB memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in . (See page 40)
✎When the factory default settings are restored, all stored user BD data is deleted.