ADDITIONAL INFORMATION
Please note that Encrypted channels may not be stored after scanning in the Digital TV channels. If this is the case then you will need to rescan the channels again but this time change the LIST SCRAMBLED CHANNELS from AUTO to ON:
1Press Menu.
2Select Features.
3Select Digital Features.
4Select User Interface Options.
5List Scrambled Channels will show.
Change “Auto” setting to “ON”
6Press Exit button to exit the Menu.
You will need to rescan the digital TV channels:
1Press Menu.
2Select Setup.
3Select Auto Tuning and press the OK button to start the channel scan and this time store the Scrambled channels.
6.3.2-Manual tuning of digital channels and storing in the memory
Press the MENU button on your remote control. Select CHANNEL SETUP by pressing the Right/Left movement button and confirm your selection with OK button. Select Digital Manual Tuning tab by pressing the Up/Down movement buttons and press Right movement button or OK button to confirm. Digital Manual Tuning menu will be displayed.
Digital Manual Tuning
VHF CH 9
Frequency | 205 MHz |
Poor Normal Good
Select 
Back
Exit
Enter the channel number from the Manual search menu using the numeric keys if you know the channel number; if you don’t know the channel number, you can perform search by using right/left direction buttons.
Channel will appear in the list and be stored in the memory when it is found. Press MENU button to return to the previous menu from the manual search menu or press EXIT button to exit the menu.
6.4-Performing Analogue channel settings
Press the MENU button on your remote control. Select CHANNEL SETUP by pressing the Right/Left
movement button and confirm your selection with OK button. Select Auto Tuning tab by pressing the
Up/Down movement buttons and press Right movement button or OK button to confirm. Country Selection
menu will be displayed.
CHANNEL SETUP
Please select country and scan type, then press OK to start tuning
Country Selection | England | |
| ||
Scan Type | ATV | |
Time Zone | London GMT | |
Select | Back | |
Exit | ||
|
Scroll to the Country Selection
tab by pressing the Up/Down
movement buttons and press Right/
Left movement buttons to select your country. Then, scroll to the Scan Type tab by pressing the Down
movement button and select ATV option by pressing the Right/Left movement buttons. Press OK button to confirm your selections. Analogue channels are searched and stored automatically. At the same moment, the progress of auto tuning and the channels stored in the memory are displayed in the menu. Program Table menu is displayed at the end of the Auto Tuning.
12
