4Start

Remove your television carefully from its box. You can keep the packaging of your television to use in future.

Contents of the box

Power cable Remote control 2 batteries

Note: Scart, HDMI, VGA and PHONO cables are not supplied with the device.

4.1-Aerial connection

4.2-Powering on your device and the initial use

1.Insert the power cable into the power supply input located on the back panel of the

LCD TV.

2.Insert the power cable plug supplied with the tv into the mains socket.

Note: Your TV is equipped to operate with TV buttons in case your R/C is broken or the batteries are exhausted.

3.Press the power on/off button located on the LCD TV.

4.To power on your television, press PR+ or PR- keys on the

remote control. For this process, you can also use the buttons on your TV. The picture will appear on the screen after a short while.

Note: If you are not going to use your television for a long time, unplug its power cable from the socket.

4.3-Performing initial start and settings

To set up your television, read the sections on the TV controls and making the channel settings.

4.4-Batteries

Open the lid of the battery compartment and make sure that you have placed the batteries in the correct direction. For this remote control, UM-4, IEC R03 or AAA 1.5 V batteries are suitable.

Do not throw your old batteries into the fire, discard them in a dedicated waste area for this purpose.

Do not mix used batteries with new ones or different types of batteries together.

The performance of the remote control will be reduced at a distance of 8 meters from or at an angle of 30 degrees beyond the centre of the TV.

7

Page 9
Image 9
Beko 32WLU530HID manual Start, Performing initial start and settings, Batteries