6.6.8-Channel List

If you press OK button when no menu is open, Channel List menu will be displayed on the screen.

CHANNEL LİST

Channel 1

Channel 2

Channel 3

Channel 4

Select Exit

You can see all the channels of the current mode while you are in the Channel List menu, you can select the desired channel with Up/Down buttons and view it by pressing the OK button.

6.7-Signal Information

This menu gives information about Channel, Network, Modulation, Signal level and quality. Press MENU button to enter this menu. Select Channel Setup menu by pressing the Right/Left movement buttons. Select Signal Information tab by pressing the Down movement button and confirm with Right movement button or OK button. Signal Information menu will be displayed.

Note: Signal Information menu will be active only for Digital broadcasts.

6.8-CA Module (Conditional Access)

In this menu, you can check the CA Module settings. If a CI module is inserted for a channel that has a scrambled broadcast, then a submenu for that module is opened and the information for that module is updated.

6.9-Active Antenna Power

When this feature is set to On, you can connect an external antenna to your television without needing any external source. Scroll to the Active Antenna Power tab by pressing the down movement button in the Channel Setup menu and select On by pressing the Right/Left movement buttons.

 

Signal Information

Channel

23

490 Mhz

Network

XX Network

 

Modulation

2X 64XXX X2/3

Quality

60%

 

Signal Strength

90%

Exit

16

Page 18
Image 18
Beko 32WLU530HID manual Signal Information, CA Module Conditional Access, Active Antenna Power, Channel List