Enjoy pictures of higher quality
Sometimes when playing DVD discs, on the TV screen there is unusual interference that are not common in ordinary television broadcast. This is because the
Playback Control
1.Direction Buttons
Press the direction buttons to move the cursor to the selected item, then press the ENTER button to confirm it.
2.Play
Press this button to play the disc.
3. Pause/Step
Press this button once to pause the playback. and press this button twice to step the playback
4.Clear
Press this button to clear the input digits (displays on the screen) when programming tracks or in searching operation.
5.Number Buttons
When playing a VCD disc, press the number buttons directly to play your favorite track in PBC off status. If the track number is from 1 to 9, you can directly press the number. If the track number is more than 9, you should use button 10+ and the other number buttons together to select the track, eg.: for track 25, first, press the +10 button twice, then press button 5.
6.STOP
When playing a DVD disc, press this button the first time during playback, the DVD player memorizes the location where you stopped (press PLAY to resume playback from the memorized point). Press this button again to stop the disc (then press PLAY to start playing from the beginning of the disc).
7.FF / FB
You may speed up a DVD , CD, VCDor Mp3 disc by pressing the FF / FB buttons on the Remote control . You can fast reverse at 2X,4X,8X and 20X.
8.SLOW
The DVD player allows for Slow Motion playback . Press this button to
Press PLAY button to resume normal playback.
9.NEXT /P REV
Press skip to select the next (previous) chapter (for DVD) or track (for VCD/CD/MP3).
10.ZOOM
This feature allows you to enlarge the picture on screen 2X , 3X, 4X,1/2X,1/3X, and 1/4X the original size . Press the ZOOM button to cyclically scroll through the available strengths
You can replay a specific portion of a disc repeatedly using this function
Press the
Press the
12. REPEAT
This function can be used to repeatedly play a Title Chapter , Track or other part of a disc.
13. PROGRAM
You can program the player to play a customised order of specific tracks , title or chapters . To program a DVD follow the instructions below.
1)Press the PROGRAM button to initiate the program function
2)Press LEFT or RIGHT to highlight either T for title or C for CHAPTER
3)Press the Numeric button of the desired title and chapter
4)Highlight PLAY on the screen using the direction button and press ENTER. Your programmed list w will now be set
5)Press the PLAY button after programming to begin playback of the memorised
For CD programming follow the above steps
16