For the efficient operation of your dishwasher, check the filters and the spray arms regularly.
There are three different filters in your machine
Main filter
Coarse filter
Micro filter
To remove the coarse and micro filter assembly
to clean, turn it anti clockwise as far as it goes and lift it up. Then press the two tongues in wards and pull out the coarse filter.
Pull the main filter off.
Clean all three filters under running tap water with a brush.
Reinsert the main filter in its place.
Place the coarse filter into the micro filter. Ensure the marks align properly.
Turn the coarse filter clockwise until you hear a clicking sound.
It is important that you fit the filters correctly.
Caution : the dishwasher must not be used without filters.
Incorrect repositioning of the filters will produce poor washing results.
Cleaning of the filters is vital to ensure correct operation of the machine.
Lower spray arm
Turn the nut anti clockwise and remove both the nut and the spray arm.
Flush away food particles under running water. Put the spray arm back on and screw on the nut turning clockwise until a clicking sound is heard.
Remove the spray arm from its slot by releasing the catches and pulling it upwards.
Flush away the food particles under running water.
Reinsert the spray arm back into its original position.
Main filter
Coarse filter
Micro filter
24
