min 850mm
Remove all packaging before positioning the machine.
See the following diagram. Ensure there is a clearance each side of the machine to allow slight side ways movement for servicing.
Work top of your dishwasher is removable if required. Height without the work top is 820 mm.
By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre- existing top, if the dimensions of the recess correspond to those shown in the picture.
Position the machine next to a water tap and a drain.
When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
Good levelling is essential for correct closure and sealing of the door,
Make sure your dishwasher is perfectly level using the adjustable feet.
When the appliance is correctly levelled, the door will not catch on the inner liner on either side of the cabinet.
If the door does not close correctly, loosen or tighten the adjustable feet, until the machine is perfectly level.
9
