Place larger items such as saucepans in the lower basket.
You can remove the cutlery basket to make room for other items .Place spoons and forks in the cutlery basket with handles down and knives with handles up to prevent accidental injury.
Warning !
Long cutlery, such as ladles and long knives, etc must be placed horizontally on top
of the full cutlery basket or on the racks to prevent accidental injury. Handle of the cutlery basket is not removable
Three-way split cutlery basket
Depending on the amount of load and load type,
To dismantle the
Rotate handgrip which is at the bottom of handle.
Remove top and bottom hangers by sliding each part in opposite direction. If you want to reassemble the cutlery basket, the reverse of the above operations should be
carried out.
Part A can not be placed in the upper basket.
Long cutlery, such as ladles and carving knives, should not be placed in the upper basket parts B or C. They can be placed on the side racks on the upper basket horizontally.
In order to obtain the best cleaning and drying performance in cutlery basket, use the separators of parts A, B and C. To remove the separators follow the below instructions
For Part A ;
Press to release catches on sides and the separators can be pulled off.
For Parts B and C;
Press to release catches on sides and the separators can be pulled off.
B A | C |
A |
The factory fitted position of the upper basket is | the higher position. That is lower wheels are engaged. | ||
According to the size of the dishes you | can change the position | of | the upper basket. |
To do this. |
|
|
|
Release the latches on both the right and left tracks by turning them sideways. | A | Pull out the basket | |
completely.Insert the other set of wheels and place the basket back on the track then shut the latches.
A
15
