Beko DWD 8657 Programme Progress Display, Unloading the dishwasher, Salt and Rinse Aid Indicators

Programme Progress Display

You can follow the step which the program is in from the program follow-up display (10) on the screen. This display includes the following steps:

(10 a) Washing

(10 b) Rinsing

(10 c) Drying

(10 d) End

Indicators for washing, rinsing and drying steps light respectively on the program follow-up screen while the program is running. The "End" indicator lights when the program is over and Start / Pause / Cancel lamp goes off. Time display shows "00:00".

If extra drying function is not selected in the 30- minute program, indicator of the drying step will not light.

Unloading the dishwasher

Dishes should be allowed to cool for about 15 - 30 minutes after the end of the programme.

You will improve drying results by leaving the dishwasher door ajar for at least 15-30 minutes as soon as the programme finishes.

!Care must be taken when opening the door, as steam will escape.

First unload the lower, then the upper rack. This prevents drops of water from falling onto the full lower basket when the dishes in the upper basket are being removed.

a b c d

10

Salt and Rinse Aid Indicators

When the indicators for salt (17) and rinse aid (15) light up, the respective reservoirs must be refilled.

17 15

21