Reversing your Front Door
1.Open door and reverse handle. See Figure A.
2.Secure door with one hand while you pull down the top hinge pin (Figure B) with the other.
3.Grab door on both sides and lift up to remove door and set it aside.
4.Remove hinge pin brackets using Phillips head screwdriver, turn and reattach hinge pin brackets to opposite corners (Figure C).
5.Remove button plugs by pushing from the back side and retain for reuse.
6.Remove latch bracket and door stops (2) using Phillips head screwdriver while holding lock nut in back. Turn and place bracket and door stops (2) on the opposite side (Figure D).
7.Put push buttons back into holes on opposite side.
8.Rehang door.
NOTE: The best time to reverse the door is prior to installing the equipment.
Standard factory door configuration is
Figure B
Figure A
Remove handle and reverse
Belkin Enclosure - User Manual v 1.0.0ek | P74789ec |
12
