1.2INSTALLATIONS

1.2.1 Installation method

The D-ILA system (reflecting type active matrix liquid crystal system) does not require convergence adjustment. Note the following when placed on a floor (refer to OPERATING INSTRUCTIONS for actual operating method).

(1)Place the projector at the position needed for the required image size observe the projector is not tilted horizontally.

[The image size is 40 to 200(wide side) inches diagonal (16:9), requiring a projection distance of 1.58m to 8.03m (wide side).]

(2)Adjust the placement site and screen tilt so that the projection angle is perpendicular to the screen.

(3)Adjust the placement site and screen position (height) so that the projection lens center is at the lower edge of the screen.

(4)Project an image on the screen. (Connect video equipment and power source, switch power on and select the input.)

(5)Fine adjust the projected image position and angle. If adjusting the placement site and screen cannot correct the projected po- sition (too low) or angle (lower part of image widened), adjust the front foot.

(6)Turn the lens ZOOM ring by hand and adjust for suitable image size.

(7)Turn the lens FOCUS ring by hand and adjust to correct image blur.

1.2.2 Installation site and status

•The projector contains a fan for cooling. Obstruction of the ventilation openings can lead to internal overheating, abnormal operation and failure. Also observe there is plenty of free space between the projector and adjacent walls, ceiling and other equipment. Note that excess heat can cause failure and damage to both the projector and nearby equipment.

Required spacing :

Front = 15cm / left and right sides = 30cm / rear = 50cm (When the unit is enclosed with block according to the required spacing on the left side, provide the unit with adequate ventilation so that the temperature inside of the enclosed area is kept at the same temperature in the open space in the room.)

•Avoid locations that are wobbly or inclined. If the setting site floor has protrusions or horizontal cannot be maintained, there is risk the projector may drop, fall over, etc. If located in a site where left to right tilt is greater than ±5° and front to rear tilt greater than ±20°, particularly the optical system components can be severely affected and there is risk basic performance and quality of the projector cannot be maintained.

•Observe the site can stably bear the weight (approx. 6.2kg) of the projector over a long period of time.

•If mounted on a stand with casters, observe the casters are securely braked to prevent movement.

•Avoid suspending in a location subject to vibration. Both the projector and mounting fixture can be damaged.

•Do not place in the following types of locations.

Especially, Avoid locations subject to dust, grit, smoke or other airborne contaminants. Use adequate caution when providing exter- nal ventilation, filters and dust protection.

‹Near water or in humid sites ‹ Near heaters or heat generating equipment

‹ Dust or grit

‹ Direct sunlight

‹Oily or tobacco smokes ‹ Very high or very low temperature

1-6 (No.PA019)

Page 5 Page 7
Page 6
Image 6
Belkin DLA-HD2KE, DLA-HD2KU Installations, Installation method, Installation site and status, Required spacing
Page 5 Page 7

DLA-HD2KU, DLA-HD2KE specifications

The Belkin DLA-HD2KE and DLA-HD2KU represent the forefront of advanced HDMI splitters, designed to cater to the evolving needs of home entertainment and professional setups. These devices are essential for users who wish to transmit high-definition audio and video signals across multiple displays without any degradation in quality.

One of the standout features of the DLA-HD2KE and DLA-HD2KU is their capability to support resolutions up to 4K at 60Hz. This ensures that users can enjoy stunning visuals with rich colors and sharp details, making these splitters an ideal choice for modern televisions, projectors, and monitors. The 4K support is complemented by support for HDR (High Dynamic Range) content, enhancing the brightness and contrast levels for a more immersive viewing experience.

Both models come equipped with EDID (Extended Display Identification Data) management, allowing for seamless communication between the source device and the connected displays. This feature eliminates compatibility issues that can arise when using different display devices, ensuring consistent video output.

The DLA-HD2KE and DLA-HD2KU utilize advanced HDMI technology that implements HDCP 2.2 compliance. This is crucial for users who want to stream content from services that require anti-piracy measures, such as Netflix and Amazon Prime. The compliance with HDCP 2.2 ensures that users won't face signal loss or interruptions during playback.

Noise reduction technology is another hallmark of these splitters. By minimizing the impact of electromagnetic interference, the DLA-HD2KE and DLA-HD2KU deliver a clear, uninterrupted signal. This is particularly beneficial in environments cluttered with various electronic devices, ensuring the integrity of your audio and video signals remains intact.

Additionally, the DLA-HD2KE model features a sleek design with a compact form factor, allowing for easy integration into any entertainment setup. The DLA-HD2KU offers a more robust user experience with enhanced connectivity options, including additional HDMI ports for users with multiple devices.

Both models come with a user-friendly installation process, offering plug-and-play functionality that eliminates the need for complicated setup procedures. Built with high-quality materials, these splitters are designed for durability and longevity, making them a reliable choice for both home users and professionals.

In summary, the Belkin DLA-HD2KE and DLA-HD2KU splitters are engineered to deliver high-quality multimedia experiences, boasting features such as 4K support, HDR compatibility, EDID management, and noise reduction technology. They are ideal solutions for those seeking to enhance their audio-visual setups, whether at home or in commercial applications.
Top Page Image Contents