Belkin DLA-HD2KU, DLA-HD2KE service manual Section Disassembly

SECTION 3

DISASSEMBLY

Notes:

•Confirm that the power cord is unplugged from the AC outlet before proceeding.

•The lamp remains quite hot after turning the power off. Allow sufficient time to cool before starting work.

3.1LENS COVER

(1)Rotate the LENS COVER on the front of the main frame counterclockwise and release the lock. Then pull out the LENS COVER toward you. (Fig.1)

3.2LAMP UNIT COVER

(1)Loosen the 2 screws marked A on the right side of the main frame and pull out the LAMP UNIT COVER toward you. (Fig.2)

These 2 screws are not removed from the LAMP UNIT COVER.

3.3TOP COVER

•Remove the LENS COVER.

•Remove the LAMP UNIT COVER.

(1)Remove the 1 screw marked B and the 2 screws marked C on the right side of the main frame. (Fig.2)

(2)Remove the 3 screws marked D on the left side of the main frame. (Fig.2)

(3)Remove the 1 screw marked E on the rear side of the main frame. (Fig.2)

(4)Remove the harness from the connector CN701 of the CONTROL UNIT which is secured to the back of the TOP COVER.

(5)Lift up the TOP COVER to remove it.

3.4PROTECT COVER

•Remove the LENS COVER.

•Remove the LAMP UNIT COVER.

•Remove the TOP COVER.

(1)Remove the 1 screw marked E' fixing the PROTECT COV- ER, and lift up the PROTECT COVER to remove it. (Fig.2)

3.5CONTROL UNIT

•Remove the LENS COVER.

•Remove the LAMP UNIT COVER.

•Remove the TOP COVER.

(1)Remove the 5 screws marked F fixing the CONTROL UNIT from the back of the TOP COVER. (Fig.2)

(2)Remove the CONTROL UNIT. (Fig.2)

		CN710
	TOP COVER	CONTROL UNIT
		E
		(x1)
LENS COVER
Fig. 1
D		A
(x3)		(x2)
	E'
(x1)
	F	LAMP UNIT COVER
	(x5)	C
		(x1)
		C
	BOTTOM CHASSIS	(x2)
		B
		(x1)
	Fig.2
		(No.PA019)1-13