Belkin F1DA104Z, F1DA108Z, F1DA116Z user manual Keyboard Hot-Key-Command Shortcuts, Command Function

Using your PRO3 KVM Switch

Keyboard Hot-Key-Command Shortcuts

Below is a complete list of hot-key commands that can be used for your PRO3 KVM Switch:

Command	Function
Space Bar	Activate OSD
	Previous host
	Next host
[01,02.,,,16] port	Non-daisy-chain KVM switch
[00,01.,,,15] BANK	Daisy-Chain Config: First and second digit specifies BANK
[01,02.,,,16] port	Daisy-Chain: Third and fourth digit specifies number
PgUP	Previous BANK
PgDown	Next BANK
B	Turn on/off beep while in AutoScan mode
S	Enable/disable OSD security
P	Turns console screen “Off”, and prompts for user name
	and password if security is enabled
A	Administrator activates AutoScan
Delete	Administrator sets the OSD back to factory-default values
	(except for security settings)

Note: You will have approximately three seconds to complete each hot-key sequence.

34