Section | Belkin F1DA104Z, F1DA108Z, F1DA116Z instruction

Installation

Step 4

Connect the Belkin Dual-Port Micro-Cable Kit for USB to the desired host ports on the PRO3 KVM Switch. (Refer to diagram below.) Your server should recognize the KVM-Switch connection and automatically install the HID USB driver, if necessary.

Step 5

Repeat Steps 1 through 4 for each additional USB server you wish to connect.

Note: We recommend that you attach the Belkin Dual-Port Micro-Cable USB Kit directly to a free USB port on your server.

Note: When a USB Cable Kit is connected to a Sun server, the Server Interface Module emulates the Sun keys using a set of key combinations called “combo keys”. Refer to the table on page 35 for a list of Sun functions supported by the PRO3 KVM Switch.

1

2

3

4

5

6

7

8

section

19

Image 21

Belkin F1DA104Z, F1DA108Z, F1DA116Z user manual Section

Contents

OmniView PRO3 KVM Switch Table of Contents Package Contents Hot Keys Feature Overview Flash Upgrade Cables Equipment Requirements Section OS Platforms System RequirementsKeyboards Mice Front View of the PRO3 KVM Switch Unit Display Diagrams Back View of the PRO3 KVM Switch Specifications Where to Place the PRO3 KVM Switch Pre-ConfigurationCable-Distance Requirements For PS/2 Servers For USB Servers Bracket Installation F1DA108Z and F1DA116Z Mounting the PRO3 KVM Switch Step Optional Bracket Installation F1DA104Z Section Connecting the Console to the PRO3 KVM Switch Section Connecting Servers to the PRO3 KVM Switch PS/2 Connection Power up your server Connecting Servers to the PRO3 KVM Switch USB Connection Section Connecting Multiple PRO3 KVM Switches Daisy-Chaining How to Assign a Bank Address BANK-DIP-Switch Configuration Chart Getting Started Example of Daisy-Chain Configuration Connecting the Primary and Secondary KVM Switches Step Connecting the Servers Step Powering Up the Systems Selecting a Server or Bank Using Hot-Key Commands Section Selecting a Bank Using Scroll Buttons Selecting a Server Using Direct-Access Port Selectors AutoScan Mode OSD Keyboard Commands On-Screen Display OSDMain OSD Main Menu User Setting Main-Menu-Page Keyboard CommandsUsername admin Password belkin Language Access List Hot KeyAutoScan Time Command Function Keyboard Hot-Key-Command Shortcuts Windows Sun Micro Mac USB Keyboard Sun Combo and Mac Key Mapping Updating Firmware To update the firmware, you will need the following items How far can the server be from the PRO3 KVM Switch? Can I mix PS/2 and USB devices on the KVM console?Can I mix PS/2 and USB servers on the host side? Can I use the PRO3 KVM Switch to switch video signals only? Does the PRO3 KVM Switch require an AC adapter?Does the PRO3 KVM Switch support Linux? How long is the warranty for the PRO3 KVM Switch? Am getting a black screen on my monitor Server boots up, but the mouse does not work Mouse is not detected at boot up USB Troubleshooting Glossary FCC Statement How state law relates to the warranty How to get service Section Belkin Tech Support Belkin B.V