Belkin F1DS102L, F1DS104L Using the KVM Switch, Select Audio & Mic Channel ScrLk + ScrLk + Fy

Using the KVM Switch

To modify the hot-key preceding sequence from the default Scroll Lock, you can either hit the hot-key sequence: scrlk – scrlk – H – (y), y = SCROLL LOCK, CAPS, ESC, F12, LEFT_CTRL, RIGHT_CTRL, or NUM LOCK (as detailed in the Hot Key Quick Reference Table below).

or

You can use another method: Press and hold the last button to enter the hot-key setting mode.

Step 1. Press and hold the last button (i.e., the second button on the 2-port model or the fourth button on the 4-port model) till you hear two beeps. Then release the button.

Step 2. Within two seconds, you should hit any of the selectable hot-key triggers (y), y = SCROLL LOCK, CAPS, ESC, F12, LEFT_CTRL, RIGHT_CTRL, or NUM LOCK, to be your hot-key trigger.

For example, if you hit CAPS after hearing the two beeps, then the hot key will be: CAPS – CAPS – command key.

For detailed hot-key sequences and their corresponding functional commands, please refer to the Hot Key Quick Reference Table below.

Hot Key Quick Reference Table

2-/4-Port SOHO KVM Switch with Audio & Mic -- Operation Commands for Hot Keys/Front-Panel Buttons

Hot-key sequence = [ScrLk] + [ScrLk] + Command key(s)

* user-definable preceding sequence = SCROLL LOCK, CAPS, F12 or NUM LOCK, LEFT_CTRL, RIGHT_CTRL

Command	Hot Keys1	Front-Panel Buttons	Description
	ScrLk + ScrLk + (x)
Select Computer Channel 2	(x is a top-row number key)	Press the computer icon on the	Select the active computer channel
(Joint-select PC port/audio &	x = 1~2 / x = 1~4 for PC	left of a button to select the
			(Hot key: Joint-select PC port/audio & mic, if binding is enabled)
mic, if binding is enabled)	channel no.	active computer channel
Select Audio & Mic Channel 2	ScrLk + ScrLk + (Fy)		Select the active audio & mic channel
(Joint-select PC port and audio	Fy = F5~F6/Fx=F5~F8 (Fy is a	--	(Hot key: Joint-select PC and audio & mic channel, if binding
& mic, if binding is enabled)	function key)		is enabled)
Bind Computer and			Enable the binding of PC port and audio & mic switching. (Hot
Audio & Mic Switching 2	ScrLk + ScrLk + Q	--	key: Once this feature is enabled, any computer and/or audio &
[Default]			mic switching by hot keys is bound together) (factory default)
Unbind PC and	ScrLk + ScrLk + W	--	Disable the binding of PC port and audio
Audio & Mic Switching 2			& mic switching
Next lower PC channel 2			Select the next lower connected PC channel
(Joint-select PC/audio & mic,	ScrLk + ScrLk +  (arrow up)	--
			(Hot key: Joint-select PC/audio & mic, if binding is enabled)
if binding is enabled)
Next higher PC channel 2	ScrLk + ScrLk + 		Select the next higher connected PC channel
(Joint-select PC/audio & mic,		--
	(arrow down)		(Hot key: Joint-select PC/audio & mic, if binding is enabled)
if binding is enabled)
Previous PC channel	ScrLk + ScrLk + Backspace	--	Toggle between the previous channel and
			current channel
	ScrLk + ScrLk + H + (y)	Press and hold down last button
		(Button 2 / Button 4) until you
Define Hot-Key	y = SCROLL LOCK, CAPS, ESC,	hear three beeps, release the	Select the hot-key preceding sequence among 6 alternative keys
Preceding Sequence	F12, NUM LOCK, LEFT_CTRL,	button, and then press (y) key.
	or RIGHT_CTRL	This resets hot-key preceding
		sequence to SCROLL LOCK.
Read KVM	Open Note Pad		Read the version of firmware that is currently on the KVM
		--	Switch. This is helpful when a firmware upgrade is performed as
Firmware Version	ScrLk + ScrLk + V		it gives you the ability to read the version of firmware, before and
			after the upgrade, to ensure the firmware has installed correctly.

Notes:

1.The USB keyboard hot keys allow faster and broader control of your KVM Switch and audio/mic switching in addition to the front-panel buttons. If you have configured a hot-key preceding sequence other than two consecutive scroll locks, you should change your hot-key sequence accordingly. (For hot-key preceding sequence configuration, please refer to the Hot Key Quick Reference Table.)

2.When the binding of PC and audio and mic switching is enabled by the hot-key sequence: ScrLk + ScrLk + Q, any PC and audio and mic switching by hot keys are bound together. (However, the binding will not affect the independent front-panel button operation.) To remove this binding, use the hot-key sequence: ScrLk + ScrLk + W.

Mac® User: Standard PC keyboard mapping to MAC keyboard -- ScrLk + ScrLk + C =  (CD/DVD drive eject key); ScrLk + ScrLk + F10 = F13 ; ScrLk + ScrLk + F11 = F14 ; ScrLk + ScrLk + F12 = F15.

LED Information:

Computer LED status (3 states: Lit/Flashing/Off). Lit = Active port with link established between KVM Switch and computer (via USB interface); Flashing = Active port but with no link established between KVM Switch and computer; Off = Non-active port.

12Audio LED status (2 states: Lit/Off). Lit = Active port for audio output; Off = Non-active port for audio output.