Remote Control Functions, Remove Power Supply | JVC HR-S7600AM

36ENSPECIALFEATURES

Remote

Control

Functions

VCR

NUMBER "1"	1		2	3
NUMBER "1"
	4		5	6
	7	"2"	8	9
	NUMBER		0
			0

1

STOP

3

2

4

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control's A code control signals and the other set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

REMOVE POWER SUPPLY

1 Unplug the mains power cord from the mains outlet.

SET REMOTE CONTROL

CODE

2 While holding down VCR on the remote control, press the NUMBER key "2" and then press STOP.

RE-SUPPLY POWER

3 Plug the mains power cord back into the mains outlet.

TURN ON THE RECORDER

4 Press on the remote control. The recorder will now only respond to B code signals.

NOTE:

To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing the NUMBER key "1" instead of "2" in step 2.

Image 36

JVC HR-S7600AM specifications Remote Control Functions, Remove Power Supply, SET Remote Control Code, RE-SUPPLY Power

Contents

HR-S7600AM Safety Precautions Moisture Condensation Check Contents Basic ConnectionsSituate Recorder Mains Video Connection Connect Recorder to TVConnect Recorder to Mains Access Video Channel SET Mode Video Channel SetSelect TV System With RF Connection SET Video Channel Finish Video Channel SETFinish Video Channel SET Auto Set Up Select LanguageSET Date SET Year During Auto Set Up Start Auto Channel SETMajor Countries TV System Press OK or Push JOG Þ On-Screen Displays Access Initial SET Screen Select Language Access Clock SET Screen Clock SetSET Time Start Clock Operation Basic Playback Load a CassettePoint Start Playback Playback Features PlaybackStill Picture/Frame-By-Frame Playback Slow Motion Adjust Tracking Manually Activate HIGH-SPEED SearchSkip Over Unwanted Sections Access Main Menu Activate Digital TBC/NRDigital 3R Digital TBC/NR Tape Position Indicator Instant ReView Activate Instant ReviewNext Function Memory Soundtrack Selection TimeScan Variable-Speed SearchPause Menu Push JOG TimeScan TimeScan AudioSpeed SP Speed LP Basic Recording Recording Features Engage ITR ModeSelect Channel to Watch SET Recording Duration Reset Counter SET Counter DisplayDisplay Remaining Time Elapsed Recording Time Indication Receiving Stereo Bilingual Programmes To Record Stereo And Bilingual Programmes A2To Record Nicam Stereo And Bilingual Programmes Type of Broadcast Select S-VHS Mode Access Main Menu ScreenVHS Super VHS, S-VHS ET and VHS Select S-VHS ET SET ModeSuper VHS ET S.T. Picture System PreparationJogþ Recording PlaybackOr press Record on the recorder During B.E.S.T System Setup Access G-CODE Showview Setup ScreenNumber Guide Program Number Set Enter Receiving Channel Position Number Number keys to input Number of the recordersReceived. Then press OK or CODETimer Programming Access G-CODE Showview Screen Timer Mode Return to NormalEngage Recorders Express Timer Programming Access ProgrammeEnter Programme Stop Time Enter Programme Date Weekly Timer Or OK. Program Completed appears onScreen for about 5 seconds, then normal screen Disengage Timer Mode Return to Timer ModeCheck, Cancel And Replace Programmes Auto SP→LP Timer Auto TimerAuto SP→LP Timer Remote Control Functions Remove Power SupplySET Remote Control Code RE-SUPPLY Power TV Multi-brand Remote Control SET TV Brand CodeOperate TV TV Brand Name Code SET Mode Preparation For EditingPicture Control Return to Normal Screen If the camcorder has no S-VIDEO output connector Recorder If the camcorder has an S-VIDEO output connector RecorderEdit From Camcorder Player Synchro Editing SET Recording Decks Input Mode Edit To Or From Another Video RecorderStart Source Player Start Recording Deck SET Input Mode Audio DubbingEngage Audio Dubbing Locate Start Point Start Dubbing END Audio DubbingPlay Stop Pause Reset the Counter Insert EditingLocate END Point Start Editing END Insert Editing Access R.A. Edit Screen Audio signal Video signalCancel Random Assemble Editing Locate EDIT-IN Point Locate EDIT-OUT PointStart R.A. Edit END R.A. Edit Access Initial SET Access Jlip ID NO. SET ScreenTerminal JLIPJoint Level Interface Protocol Connector Connecting Using a Stereo System Audio Cable not provided Setting Of The Colour System Select Buttons Mode DisplayMode Description Off-Air Recording Tape-To-Tape Editing Playback equipmentDubbed tape Auto Channel Set Tuner SET, then pressOK or Push Jogþ Auto CH SET, then Access Tuner SET Access Channel ListSelect Position SET Desired Station Delete a Channel Swap Channel PositionsJOG% Fine-Tuning Channels Push JOG Þ If youre using the RF OUT connec- tion Press Play to turn the indicator off Check the cassette Timer record information has been Timer again Roubleshooting New one. pg Quest Ions and Answers Index Display Panel EN Index Supplied fresh battery actual Maximum recording time HR-S7600AM