JVC HR-S7600AM G-CODE Timer Programming

30 EN
ACCESS G-CODE/
SHOWVIEW SCREEN
1
Press PROG.
ENTER G-CODE NUMBER
2
Press the NUMBER keys to
enter the G-CODE number
of a programme you wish
to record.
●If you make a mistake,
press CANCEL and input
the correct number.
ACCESS G-CODE
PROGRAMME SCREEN
3
Press OK, and the G-CODE
Programme screen
appears. (If you're just
starting out, "P1" appears.)
IMPORTANT
Make sure the channel position number you wish
to record is displayed; if not, see "G-CODE System
Setup" on page 28 and set the Guide Program
number for that G-CODE number correctly.
●If the number you entered is invalid, "ERROR" appears
on the screen. Press CANCEL and input a valid G-CODE
number.
●If the "G-CODE/SHOWVIEW SETUP" screen appears,
see "ATTENTION – Regarding Guide Program
Number Set" on page 31.
SET TAPE SPEED
4
Press SP/LP/EP ( ) to set the tape speed.
G-CODE Timer
Programming
Before performing G-CODE Timer Programming:
●Be sure to read "G-CODE System Setup" (Z pg. 28).
●Insert a cassette with the safety tab in place. The recorder
will come on automatically.
●Turn on the TV and select the VIDEO channel (or AV
mode).
●Select the appropriate colour system by pressing the
COLOUR SYSTEM button (Z pg. 50).
With the G-CODE system, timer programming is greatly simpli-
fied because each TV programme has a corresponding code
number which your recorder is able to recognise.
TIMER RECORDING (cont.)
123
456
789
0
2
4
1
3
OK
NUMBER
CANCEL
REW FF
JOG
SHUTTLE
STANDBY/ ON
TIMERS-VHS ET STOP/EJECT DIGITAL
TBC/NR
PAUSE
PLAY
VIDEOS-VIDEO (S-2) (MONO)L —AUDIO— R
TV PROG
SYNCHRO EDIT SP/LP/EP COLOUR SYSTEM
INSERT A.DUB
REC
COLOUR SYSTEM
SP/LP/EP
PROG
G-CODE/SHOWVIEW
[0 – 9] =
[+/–] : EXPRESS PROGRAMING
[PROG] : EXIT
G-CODE/SHOWVIEW
12345678
[0 – 9] =
[CANCEL] : DELETE
[PROG] : EXIT
– P1 –
G-CODE/SHOWVIEW123456789
START STOP
21:00 =22:00
SP
DATE TV PROG
25.12 1
: OK