Setting Of The Colour System Select Buttons | JVC HR-S7600AM

50EN

INFORMATIONONMULTI-SYSTEMCOMPATIBILITY

Setting Of The Colour System Select Buttons

COLOUR SYSTEM

Mode Display

AUTO

NTSC 3.58

NTSC 4.43

NTSCPAL*

PAL

MESECAM

Use the COLOUR SYSTEM button on the front panel to select the colour system. Pressing this button changes the mode as illustrated on the left. The On-Screen display will show which mode is selected.

Mode	Description

AUTO	Usually set to this mode. This mode
	automatically detects PAL, NTSC, SECAM
	or MESECAM and adjusts to the colour
	system being recorded or played back.
	When it does not perform properly, set the
	colour system manually.

MANUAL	For recording, there is a choice of 4
	selectable modes; PAL/MESECAM/NTSC
	3.58/NTSC4.43. Select the mode that
	matches the colour signal being received.
	For playback, there is an additional mode
	which allows NTSC tapes to be played
	back and viewed on PAL TVs.

*"NTSC[PAL" appears during playback only.

NOTES:

●In the AUTO mode, NTSC signals will be automatically recorded as NTSC 3.58.

●In the AUTO mode, NTSC tapes will be played back as NTSC 3.58.

●SECAM signals will always be recorded as MESECAM. Select the AUTO or the MESECAM mode when recording SECAM signals.

●When playing back a SECAM tape, select the AUTO or MESECAM mode. The playback picture will always be monochrome.

●In the NTSC4.43 mode, with some TVs, on-screen displays (Programme screen etc.) may roll up or down and there may be a loss of colour. When this happens, select the AUTO mode.

Off-Air Recording

The built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K and NTSC broadcasts.

TV system

PAL B/G, I, D/K

SECAM B/G,

D/K (OIRT)

NTSC (M)

NOTE:

HR-S7600AM	Recorded tape
	PAL
	Recording circuit
	PAL
Multi-system	MESECAM
Multi-system
tuner	MESECAM
(B/G, I, D/K, M)
	NTSC
	NTSC 3.58

This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).

Image 50

JVC HR-S7600AM Setting Of The Colour System Select Buttons, Off-Air Recording, Mode Display, Mode Description

Contents

HR-S7600AM Safety Precautions Moisture Condensation Situate Recorder Check ContentsBasic Connections Mains Connect Recorder to Mains Video ConnectionConnect Recorder to TV Select TV System Access Video Channel SET ModeVideo Channel Set With RF Connection Finish Video Channel SET Video ChannelFinish Video Channel SET SET SET Date Auto Set UpSelect Language SET Year Major Countries TV System During Auto Set UpStart Auto Channel SET Press OK or Push JOG Þ On-Screen Displays Access Initial SET Screen Select Language SET Time Access Clock SET ScreenClock Set Start Clock Operation Point Basic PlaybackLoad a Cassette Start Playback Still Picture/Frame-By-Frame Playback Playback FeaturesPlayback Slow Motion Skip Over Unwanted Adjust Tracking ManuallyActivate HIGH-SPEED Search Sections Digital 3R Access Main MenuActivate Digital TBC/NR Digital TBC/NR Next Function Memory Tape Position Indicator Instant ReViewActivate Instant Review Soundtrack Selection Pause Menu Push JOG TimeScanVariable-Speed Search Speed SP TimeScanTimeScan Audio Speed LP Basic Recording Select Channel to Watch Recording FeaturesEngage ITR Mode SET Recording Duration Display Remaining Time Reset CounterSET Counter Display Elapsed Recording Time Indication To Record Nicam Stereo And Bilingual Programmes Receiving Stereo Bilingual ProgrammesTo Record Stereo And Bilingual Programmes A2 Type of Broadcast VHS Super VHS, S-VHS Select S-VHS ModeAccess Main Menu Screen ET and VHS Super VHS ET Select S-VHS ET SETMode Jogþ S.T. Picture SystemPreparation Or press Record on the recorder RecordingPlayback During B.E.S.T Number System SetupAccess G-CODE Showview Setup Screen Guide Program Number Set Received. Then press OK or Enter Receiving Channel Position NumberNumber keys to input Number of the recorders CODETimer Programming Access G-CODE Showview Screen Engage Recorders Timer ModeReturn to Normal Enter Programme Stop Time Express Timer ProgrammingAccess Programme Enter Programme Date Screen for about 5 seconds, then normal screen Weekly TimerOr OK. Program Completed appears on Check, Cancel And Replace Programmes Disengage Timer ModeReturn to Timer Mode Auto SP→LP Timer Auto SP→LP TimerAuto Timer SET Remote Control Code Remote Control FunctionsRemove Power Supply RE-SUPPLY Power Operate TV TV Multi-brand Remote ControlSET TV Brand Code TV Brand Name Code Picture Control SET ModePreparation For Editing Return to Normal Screen Edit From Camcorder If the camcorder has no S-VIDEO output connector RecorderIf the camcorder has an S-VIDEO output connector Recorder Player Synchro Editing Start Source Player SET Recording Decks Input ModeEdit To Or From Another Video Recorder Start Recording Deck Engage Audio Dubbing SET Input ModeAudio Dubbing Locate Start Point Play Stop Pause Start DubbingEND Audio Dubbing Locate END Point Reset the CounterInsert Editing Start Editing END Insert Editing Cancel Access R.A. Edit ScreenAudio signal Video signal Random Assemble Editing Start R.A. Edit Locate EDIT-IN PointLocate EDIT-OUT Point END R.A. Edit Terminal JLIPJoint Level Interface Protocol Connector Access Initial SETAccess Jlip ID NO. SET Screen Connecting Using a Stereo System Audio Cable not provided Mode Description Setting Of The Colour System Select ButtonsMode Display Off-Air Recording Dubbed tape Tape-To-Tape EditingPlayback equipment OK or Push Jogþ Auto Channel SetTuner SET, then press Auto CH SET, then Select Position Access Tuner SETAccess Channel List SET Desired Station JOG% Delete a ChannelSwap Channel Positions Fine-Tuning Channels Push JOG Þ If youre using the RF OUT connec- tion Press Play to turn the indicator off Check the cassette Timer record information has been Timer again Roubleshooting New one. pg Quest Ions and Answers Index Display Panel EN Index Supplied fresh battery actual Maximum recording time HR-S7600AM