Roubleshooting, New one. pg | JVC HR-S7600AM specs

58EN

TROUBLESHOOTING(cont.)

	OTHER PROBLEMS

		SYMPTOM		POSSIBLE CAUSE		CORRECTIVE ACTION
	1.	Whistling or howling is heard from		● The camcorder's microphone is too		Position the camcorder so its
		the TV during camcorder record-		close to the TV.		microphone is away from the TV.
		ing.		● The TV's volume is too high.		Turn the TV's volume down.

	2.	When scanning channels, some of		● Those channels have been desig-		If you need the skipped channels,
		them are skipped over.		nated to be skipped.		restore them. (☞ pg. 53)

	3.	The channel cannot be changed.		● Recording is in progress.		Press PAUSE to pause the recording,
						change channels, then press PLAY to
						resume recording.

	4.	Channel settings that were made		● After the manual settings were		Perform manual setting again.
		manually seem to have changed or		made, Auto Channel Set was
		disappeared.		performed.

	5.	No channels are stored in the		● The TV aerial cable was not		Connect the TV aerial cable to the
		recorder's memory.		connected to the recorder when		recorder properly and turn off the
				Auto Set Up was performed.		recorder power once, then turn the
						recorder power back on again. The
						recorder will try Auto Set Up again.
						(☞ pg. 8)

	6.	"– –:– –" is displayed on the front		● The lithium battery is exhausted.		Replace the lithium battery with a
		display panel after a power outage.				new one. (☞ pg. 7)

Image 58

JVC HR-S7600AM specifications Roubleshooting, New one. pg

Contents

HR-S7600AM Safety Precautions Moisture Condensation Situate Recorder Check ContentsBasic Connections Mains Connect Recorder to TV Video ConnectionConnect Recorder to Mains Select TV System Access Video Channel SET ModeVideo Channel Set With RF Connection Finish Video Channel SET Video ChannelFinish Video Channel SET SET SET Date Auto Set UpSelect Language SET Year Major Countries TV System During Auto Set UpStart Auto Channel SET Press OK or Push JOG Þ On-Screen Displays Access Initial SET Screen Select Language SET Time Access Clock SET ScreenClock Set Start Clock Operation Point Basic PlaybackLoad a Cassette Start Playback Still Picture/Frame-By-Frame Playback Playback FeaturesPlayback Slow Motion Skip Over Unwanted Adjust Tracking ManuallyActivate HIGH-SPEED Search Sections Digital 3R Access Main MenuActivate Digital TBC/NR Digital TBC/NR Next Function Memory Tape Position Indicator Instant ReViewActivate Instant Review Soundtrack Selection Variable-Speed Search TimeScanPause Menu Push JOG Speed SP TimeScanTimeScan Audio Speed LP Basic Recording Select Channel to Watch Recording FeaturesEngage ITR Mode SET Recording Duration Display Remaining Time Reset CounterSET Counter Display Elapsed Recording Time Indication To Record Nicam Stereo And Bilingual Programmes Receiving Stereo Bilingual ProgrammesTo Record Stereo And Bilingual Programmes A2 Type of Broadcast VHS Super VHS, S-VHS Select S-VHS ModeAccess Main Menu Screen ET and VHS Mode Select S-VHS ET SETSuper VHS ET Preparation S.T. Picture SystemJogþ Or press Record on the recorder RecordingPlayback During B.E.S.T Number System SetupAccess G-CODE Showview Setup Screen Guide Program Number Set Number keys to input Number of the recorders Enter Receiving Channel Position NumberReceived. Then press OK or CODETimer Programming Access G-CODE Showview Screen Return to Normal Timer ModeEngage Recorders Enter Programme Stop Time Express Timer ProgrammingAccess Programme Enter Programme Date Or OK. Program Completed appears on Weekly TimerScreen for about 5 seconds, then normal screen Return to Timer Mode Disengage Timer ModeCheck, Cancel And Replace Programmes Auto Timer Auto SP→LP TimerAuto SP→LP Timer SET Remote Control Code Remote Control FunctionsRemove Power Supply RE-SUPPLY Power Operate TV TV Multi-brand Remote ControlSET TV Brand Code TV Brand Name Code Picture Control SET ModePreparation For Editing Return to Normal Screen Edit From Camcorder If the camcorder has no S-VIDEO output connector RecorderIf the camcorder has an S-VIDEO output connector Recorder Player Synchro Editing Start Source Player SET Recording Decks Input ModeEdit To Or From Another Video Recorder Start Recording Deck Engage Audio Dubbing SET Input ModeAudio Dubbing Locate Start Point END Audio Dubbing Start DubbingPlay Stop Pause Insert Editing Reset the CounterLocate END Point Start Editing END Insert Editing Cancel Access R.A. Edit ScreenAudio signal Video signal Random Assemble Editing Start R.A. Edit Locate EDIT-IN PointLocate EDIT-OUT Point END R.A. Edit Access Jlip ID NO. SET Screen Access Initial SETTerminal JLIPJoint Level Interface Protocol Connector Connecting Using a Stereo System Audio Cable not provided Mode Description Setting Of The Colour System Select ButtonsMode Display Off-Air Recording Playback equipment Tape-To-Tape EditingDubbed tape OK or Push Jogþ Auto Channel SetTuner SET, then press Auto CH SET, then Select Position Access Tuner SETAccess Channel List SET Desired Station Swap Channel Positions Delete a ChannelJOG% Fine-Tuning Channels Push JOG Þ If youre using the RF OUT connec- tion Press Play to turn the indicator off Check the cassette Timer record information has been Timer again Roubleshooting New one. pg Quest Ions and Answers Index Display Panel EN Index Supplied fresh battery actual Maximum recording time HR-S7600AM