JVC HR-S7600AM Recording

20 EN

123

456

789

0

2

4

1

3

REW FF

JOG

SHUTTLE

STANDBY/ ON

TIMERS-VHS ET STOP/EJECT DIGITAL

TBC/NR

PAUSE

PLAY

VIDEOS-VIDEO (S-2) (MONO)L —AUDIO— R

TV PROG

SYNCHRO EDIT

SP/LP/EP

COLOUR SYSTEM

INSERT A.DUB

REC

TV signals being received by the recorder's built-in tuner can be

recorded onto a video tape. You can "capture" a TV programme

using your video recorder.

S-VHS recording is possible only for PAL recordings made in the

SP or LP mode, or NTSC recordings made in the SP mode.

S-VHS ET recording is possible only for PAL recordings made in

the SP mode, or NTSC recordings made in the SP mode.

RECORDING

Basic

Recording LOAD A CASSETTE

1

Insert a cassette with the record safety tab intact.

●The counter is reset to 0:00:00 and the recorder

power comes on automatically.

●Select the appropriate colour system by pressing the

COLOUR SYSTEM button (Z pg. 50).

CHOOSE A PROGRAMME

2

Press TV PROG +/– or the NUMBER keys to select the

channel you wish to record.

SET TAPE SPEED

3

Press SP/LP/EP ( ). Check the SP/LP/EP indicator on

the recorder display panel to confirm the selected tape

speed.

START RECORDING

4

Press and hold RECORD and PLAY on the remote

control, or press RECORD on the recorder.

PAUSE/RESUME

RECORDING

5

Press PAUSE. Press PLAY to resume recording.

STOP RECORDING

6

Press STOP on the remote control or STOP/EJECT on

the recorder. Then press STOP/EJECT to remove the

cassette.

●To prevent accidental recording on a recorded cassette,

remove its safety tab. To record on it later, cover the hole

with adhesive tape.

Record safety tab

Accidental erasure prevention

Recording Resume

Function

If there is a power outage during recording (or Instant Timer

Recording or timer recording), the recording will resume

automatically when power is restored to the recorder unless

the recorder's memory backup has expired.

PAUSE

STOP

RECORD

TV PROG+/–

B.E.S.T. takes place at the beginning of each first

SP and first LP (or EP) recording after inserting the

cassette (Z pg. 26).

PLAY

NUMBER

SP/LP/EP

Turn on the TV and select the VIDEO channel (or AV mode).

PLAY

STOP/EJECT

SP/LP/EP

NOTE:

When recording in NTSC, if EP is selected, recording willalways be done in the VHS mode even if an S-VHS cassette isused.

RECORD

COLOUR SYSTEM

TV PROG

Contents

Main HR-S7600AM VIDEO CASSETTE RECORDER EN INSTRUCTIONS ENGLISH Safety Precautions CAUTION ATTENTION MOISTURE CONDENSATION ABOUT HEAD CLEANING Connections SITUATE RECORDER TV To Connect To A TV With NO AV Input Terminals . . . To Connect To A TV With AV Input Terminals . . . S-VIDEO Connection You can obtain high-quality S-VHS pictures. pg. 49). For switching the TV's mode, refer to the instruction manual of your television. Video Channel Set INITIAL SETTINGS ACCESS VIDEO CHANNEL TEST SIGNAL To view picture signals from the video recorder, set your TV to the Video Channel. SET VIDEO CHANNEL 4 FINISH VIDEO CHANNEL With AV Connection or S-VIDEO Connection IMPORTANT: SET VIDEO CHANNEL FINISH VIDEO CHANNEL To view picture signals from the video recorder, set your TV to its AV mode. Installing/Removing the lithium battery 1 Auto Set Up Z SELECT LANGUAGE SET TIME SET DATE START AUTO CHANNEL On-Screen Displays ENABLE/DISABLE ON-SCREEN DISPLAY The superimposed indication on the TV screen tells you what the recorder is doing. q6 Select Language ACCESS LANGUAGE SELECT SCREEN SELECT LANGUAGE Clock Set ACCESS CLOCK SET SET TIME SET DATE SET YEAR Playback LOAD A CASSETTE FIND PROGRAMME START POINT STOP PLAYBACK Usable cassettes Playback Features Still Picture/Frame-By-Frame For Time Jog, see page 19. PAUSE DURING PLAYBACK ACTIVATE FRAME-BY-FRAME OVERRIDE AUTOMATIC TRACKING Skip Search Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback. ADJUST TRACKING MANUALLY RETURN TO AUTOMATIC TRACKING ACTIVATE DIGITAL TBC/NR Digital 3R SELECT DIGITAL 3R SET Normally it is recommendable to keep "DIGITAL 3R" set to "ON". Next Function Memory ACTIVATE INSTANT REVIEW TimeScan "TIME SCAN AUDIO" must be set to "ON", or the sound will not be heard in TimeScan mode ( pg. 19). The audio will not synchronize with the video in TimeScan modes. In Pause mode 3 seconds (approx.) of audio will be played back repeatedly ( TimeScan If you don't want to hear TimeScan audio, set "TIME SCAN AUDIO" to "OFF" (See below). TimeScan Audio 1 2 3 Recording CHOOSE A PROGRAMME PAUSE/RESUME RECORDING STOP RECORDING Accidental erasure prevention Recording Features Record One Programme While Watching Another SELECT CHANNEL TO WATCH Instant Timer Recording (ITR) ENGAGE ITR MODE SET COUNTER DISPLAY RESET COUNTER Tape Remaining Time DISPLAY REMAINING TIME Receiving Stereo And Bilingual Programmes To Record Stereo And Bilingual Programmes (A2) pg. 17). "O.S.D." must be set to "ON" or the on-screen displays will not appear ( pg. 10). ACCESS MAIN MENU SCREEN ACCESS FUNCTION SET SCREEN SELECT S-VHS MODE Super VHS ET SELECT S-VHS ET SET S-VHS ET B.E.S.T. Picture System Preparation Recording TIMER RECORDING G- System Setup Guide Program Number Set SHOWVIEW SETUP ENTER GUIDE PROG NUMBER INFORMATION ENTER RECEIVING CHANNEL POSITION NUMBER Guide Program Number SHOWVIEW SCREEN ENTER G-CODE NUMBER ACCESS G-CODE PROGRAMME SCREEN G-CODE Timer Programming 12345678 ENGAGE RECORDER'S TIMER MODE Regarding Guide Program Number Set Satellite Tuner Users Express Timer Programming SHOWVIEW SCREEN ENTER PROGRAMME START TIME ENTER PROGRAMME STOP TIME ENTER PROGRAMME DATE ENGAGE RECORDER'S TIMER MODE Check, Cancel And Replace Programmes DISENGAGE TIMER MODE To cancel or replace a programme... CHECK SCREEN CANCEL OR REPLACE A PROGRAMME RETURN TO TIMER MODE Auto Timer The Auto SP Auto SPLP Timer Remote A/B Code Switching REMOVE POWER SUPPLY Remote Control Functions Control Your TV Using Additional Buttons SET TV BRAND CODE OPERATE TV TV Multi-brand Remote Control Preparation For Editing Advantages Of S-VHS Video Recorders EDITING Picture Control ACCESS MAIN NENU SCREEN Edit From A Camcorder MAKE CONNECTIONS Z If the camcorder has no S-VIDEO output connector... If the camcorder has an S-VIDEO output connector... Synchro Editing SET RECORDER'S INPUT START SYNCHRO EDITING PAUSE SYNCHRO EDITING The Synchro Editing function may not work with the initial part of a camcorder tape. Edit To Or From Another Video Recorder SET RECORDING DECK'S INPUT MODE START SOURCE PLAYER START RECORDING DECK IMPORTANT: Audio Dubbing SET INPUT MODE ENGAGE AUDIO DUBBING START DUBBING END AUDIO DUBBING Insert Editing SET INPUT MODE LOCATE END POINT RESET THE COUNTER ENGAGE INSERT EDITING START EDITING END INSERT EDITING FOR AV INSERT EDITING Random Assemble Editing PREPARE FOR EDITING LOAD SOURCE CASSETTE START SOURCE PLAYBACK ACCESS R.A. EDIT SCREEN LOCATE EDIT-IN POINT @ # LOCATE EDIT-OUT POINT PREPARE RECORDING DECK START R.A. EDIT ACCESS JLIP ID NO. SET SET JLIP ID NUMBER Connecting/ Using A Stereo System SYSTEM CONNECTIONS When listening to sound through the connected stereo system, turn the TV's volume down completely. CAUTIONS: COLOUR SYSTEM INFORMATION ON MULTI-SYSTEM COMPATIBILITY Setting Of The Colour System Select Buttons Off-Air Recording When viewing NTSC tapes on a PAL TV set: Tape-To-Tape Editing TUNER SET Auto Channel Set SELECT AUTO CH SET Manual Channel Set SELECT POSITION SELECT BAND SET DESIRED STATION If you do not want to store the detected station... If you want to store the detected station... SELECT CHANNEL DELETE CHANNEL Swap Channel Positions SELECT POSITION (e.g. 03) SELECT POSITION (e.g. 09) SELECT CHANNEL TO FINE-TUNE PERFORM TUNING TV System Selection When you see the picture but the audio can't be heard or sounds unnatural SELECT CHANNEL TROUBLESHOOTING POWER TAPE TRANSPORT PLAYBACK RECORDING TIMER RECORDING TROUBLESHOOTING (cont.) OTHER PROBLEMS QUESTIONS AND ANSWERS PLAYBACK RECORDING TIMER RECORDING REAR VIEW INDEX #^ &*( )$ % FRONT VIEW DISPLAY PANEL 09 !@8 1 5 762 3 4 SP REVIEW INDEX (cont.) REMOTE CONTROL ) q 9 SPECIFICATIONS