JVC HR-S7600AM specifications Return to Normal, Engage Recorders, Timer Mode

NUMBER

STOP+/–

PROG

1

4

7

1

2

5

DAILY3

6

9

2

4

WEEKLY

TIMER

EN31

	RETURN TO NORMAL
5	SCREEN
	Press PROG or OK. "PROGRAM COMPLETED" appears
	on the screen for about 5 seconds, then normal screen
	appears.
	● Repeat steps 1 – 5 for each additional programme.
	ENGAGE RECORDER'S
6	TIMER MODE
	Press TIMER. The recorder turns off automatically and
	"ä" appears on the display panel.
	● To disengage the timer, press TIMER again.

NOTES:

● To Change The Stop Time . . .

. . . press STOP +/– after pressing OK in step 3. You can

compensate for anticipated programme schedule delays this

way.

● To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key

3 OK

PUSH JOG

"9") for weekly serials or DAILY (NUMBER key "8") for daily

serials (Monday – Friday). Either "WEEKLY" or "DAILY"

appears on the screen. Pressing the button again makes the

corresponding indication disappear.

● You can programme this recorder to timer-record as many as 8

programmes. If you try to programme the recorder to record a

ninth, "PROGRAM FULL" appears on screen. To record the

extra programme, you must first cancel any unnecessary

programmes (☞ pg. 34).

● It is not possible to timer-record a TV programme with a

G-CODEnumber which starts with "0".

Satellite Tuner Users

To timer-record a satellite broadcast using the G-CODEsystem:

1Perform steps 1 – 6.

2Set the satellite tuner to the appropriate channel before

the selected programme begins.

3Leave the satellite tuner's power on.

ATTENTION

Regarding Guide Program Number Set

"G-CODE/SHOWVIEW SETUP" appears after performing step 3 if the Guide Program number for the G-CODEnumber you entered has not been set.

●Press the NUMBER keys or PUSH JOG %Þ to input the channel position number on which your recorder

receives that station, then press OK or PUSH JOG %. The G-CODEprogram screen appears.

G-CODE/SHOWVIEW SETUP

GUIDE PROG	TV PROG
2	– –

[0-9] OR [5/°]:SELECT = [PROG] : EXIT

(Ex.) To timer-record a RTR programme with the G-CODEsystem.

*If your recorder receives RTR on the channel position

2, press OK or PUSH JOG % after entering "2".