35
35
Manually Configuring your Router
Note: Select “WPA” if you are using this c omputer to connect to a corpo rate
network that supports an au thentication server su ch as a radius server. Consult
your network administrator for f urther information.
6. Select “TKIP” or “AES” under “Data Encr yption”. This setting wil l have to be
identical to the Router.
7. Type in your encryption key in the “Network Key” box.
Important: Enter yo ur pre-shared key. This can be f rom eight to 63 characters
and can be letters, number s, or symbols. This same key mus t be used on all of the
clients that you set up.
8. Click “OK” to apply settings.
Wireless Range Extension and Bridging
What is a Wirele ss Bridge?
A wireless bridge is actuall y an operation “mode” you can us e to extend the range
of your wireless network, or add a n extension of your network in a nother area of
your office or home without run ning cables.
Note: We can make no guarantees t hat this feature will interope rate with hardware
from other wireless manufac turers.
Note: Please make sure to downloa d the latest firmware version fo r the Router for
optimal performance at: h ttp://web.belkin.com/s upport.
Adding Another N etwork Segmen t Wirelessly
Connecting a network switch or hu b to the Router’s RJ45 jack will allow a numbe r
of computers connected to the switc h access to the rest of the networ k.
section
2
1
3
4
5
6
7
8
9
10
11