Belkin F5D9000 user manual Section

Installing and Setting up the Card

1B.6 Now secure the Card with the screw that you previously put aside.

1B.7 Carefully screw the antenna onto the threaded connector on the Card. Turn the antenna until it is vertical, pointing up.

1B.8 Replace the computer’s cover. Now that the Card is installed, you can reconnect the power cord and turn the computer back on.

1B.9 Depending on your computer’s operating system version, the “Found New Hardware Wizard” might appear within 3–15 seconds. If it does, continue to follow the prompts. Select “Locate and install the driver software” to continue.

1B.10 You might see a screen similar to the one pictured below. This DOES NOT mean there is a problem. Our software has been fully tested and is compatible with this operating system. Select “Install this driver software anyway” and follow the on-screen instructions.

1B.11 Next, a screen appears indicating that hardware installation is taking place; then, another indicates that the process is complete.

1B.12 Click “Finish” to complete the installation.

1

2

3

4

5

6

section

11