Belkin N1 Troubleshooting, section, Under “Network Authentication”, select “WPA-PSK no server

Troubleshooting

I am having difficulty setting up Wireless Protected Access (WPA) security on a Belkin wireless client card for a home network.

Clients must use the same key that the N1 Vision uses. For instance, if the key is “Smith Family Network Key” in the N1 Vision, the clients must also use that same key.

1.Double-click the Signal Indicator icon to bring up the “Wireless Network” screen. The “Advanced” button will allow you to view and configure more options of your card.

2.Once the “Advanced” button is clicked, the Belkin Wireless Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card.

3.Under the “Wireless Network Properties” tab, select a network name from the “Available Networks” list and click the “Properties” button.

4.Under “Network Authentication”, select “WPA-PSK (no server).

5.Type your WPA key in the “Network key” box.

Important: WPA-PSK is a mixture of numbers and letters from A-Z and 0-9. For WPA-PSK you can enter eight to 63 characters. This network key needs to match the key you assign to your N1 Vision.

6.Click “OK, then “Apply” to save the settings.

1

2

3

4

5

6

7

8

9

10

section

101