Belkin N1 4 5, PPTP Account, PPTP Password, Host Name, Service IP Address, My IP Address

Alternate Setup Method

Setting your Internet Service Provider (ISP) Connection Type to Point-to-Point Tunneling Protocol (PPTP)

[European countries only]

Some ISPs require a connection using PPTP protocol, a type of connection most common in European countries. This sets up a direct connection to the ISP’s system. Type in the information provided

by your ISP in the space provided. When you have finished, click “Apply Changes” (9). After you apply the changes, the Internet Status indicator will read “connection OK” if your N1 Vision is set up properly.

(1)

(2)

(3)

(4) (5) (6)

(7)

(8)

(9)

1.PPTP Account

Provided by your ISP. Enter your PPTP account name here.

2.PPTP Password

Type in your password and retype it into the “Retype Password” box to confirm it.

3.Host Name

Provided by your ISP. Enter your host name here.

4.Service IP Address

Provided by your ISP. Enter your service IP address here.

5.My IP Address

Provided by your ISP. Enter the IP address here.

40