Belkin N1 user manual Hardware Connections - Follow the Quick Installation Guide QIG, section

Connecting and Configuring your N1 Vision

Step 1 Hardware Connections – Follow the Quick Installation Guide (QIG)

modem router back of computer WWW

6

routersetup

WAN		7
LAN	2 3	4

2 4

1	5
existing cable	new cable from package

1.Plug the power supply into the wall outlet.

2.Plug the other end into the black port on the N1 Vision.

3.Find the cable connecting the modem and computer**. Unplug it from the computer and plug it into the yellow port on the N1 Vision.

**If you are replacing an existing router, find the cable connecting the modem and old router. Disconnect it from the old router and plug it into the yellow port on your Belkin N1 Vision.

4.Connect the new cable (provided in the box) to any gray port on the N1 Vision.

5.Connect the other end of that cable to a networking (Ethernet) port on your computer.

6.Rotate the antennas up.

7. Open a web browser on that computer. The Belkin Router Setup Wizard should appear automatically. If it doesn’t, enter “routersetup” into the web-address field and press the “Enter” key.

1

2

3

4

5

6

7

8

9

10

section

15