Connecting to your wireless network
If you already have a wireless router or an access point in your home or office, the Adapter will automatically attempt to connect to your wireless network. In most cases, the Adapter will be able to connect to your network automatically. If your wireless network is using encryption, you will need to set the encryption settings of your Adapter to match that of your wireless network. For information about configuring your Adapter, see the next section in this manual.
Uninstalling the Software and Drivers
If you need to remove the software and drivers for any reason, you can easily accomplish this in one of two ways. You can insert the software CD and click on the Installer. Select Customer Remove from the dropdown list. Check the Belkin_USB WLAN MAC9 Driver v1.00 and the Belkin_USB WLAN MAC9 Driver Setup Utility v1.00. Click Remove.
