Belkin F5D9631-4, PM01522EA user manual Setting your ISP Connection Type to PPPoE or PPPoA

Using the Web-Based Advanced User Interface

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

Setting your ISP Connection Type to PPPoE or PPPoA

PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of connecting networked devices. It requires a user name and password to access the network of your ISP for connecting to the Internet. PPPoA (PPP over ATM) is similar to PPPoE, but is mostly implemented in the UK. Select PPPoE or PPPoA and click “Next”. Then enter the information provided by your ISP, and click “Apply Changes” to activate your settings.

1. User Name -Enter the user name. (Assigned by your ISP).

2. Password - Enter your password. (Assigned by your ISP).

3. Retype Password - Confirm the password. (Assigned by your ISP).

4. Service Name (Optional) - A service name is rarely required by an ISP. If you are not sure if your ISP requires a service name, leave this blank.

G+ MIMO Wireless Modem Router 33