DS0 Wholesale Local Platform Service – 2 Wire ISDN BRI

Pre-Ordering Checklist: DS0 Wholesale Local Platform Service - 2-Wire

ISDN/BRI

Availability

This DS0 Wholesale Local Platform Service – 2-Wire ISDN/BRI will be offered where the BellSouth switch is ISDN-BRI equipped, where the facilities are available, and consistent with CLEC agreement terms, conditions and rates.

Billing Information

The CLEC must provide a facility based OCN and Q account number.

DS0 local switching elements associated with calls carried over these services will be applied based on the interconnection agreement.

This service will be billed monthly on a Carrier Access Billing System (CABS) standard bill known in the industry as the “J” Bill. For samples of the “”J” bill, see the notification letter SN91081502, dated June 15, 1999. The interconnection web site below connects the CLEC to a guide on “Understanding Your Bill”.

http://www.interconnection.bellsouth.com/billing_a_clec/content/index.htm

Monthly bills will be sent through an agreed upon electronic process. If no electronic process is selected, paper bills will be sent to the CLEC.

Each day BellSouth will electronically send the CLEC an ADUF detailing all access usage for its end-user customers and ODUF detailing all local and intrastate toll usage for its end-user customers. To receive ADUF messages, CLEC must have Network Data Mover (NDM) software.

Transport

If a customer’s serving wire center is not equipped for ISDN and an interoffice channel, FX, or FCO is required, and the appropriate interoffice channel mileage will be charged.

BellSouth Interconnection Services

10

June 15. 2004

Your Interconnection AdvantageSM

 

Version 1

Page 10
Image 10
BellSouth Version 1 manual Availability, Billing Information, Transport