Troubleshooting4
The following pages contain troubleshooting/ fault analysis charts for the Classic convection oven.
Error Codes for the BX Classic Oven
Code | Possible Causes | What To Do |
|
|
|
E01 | Bake Data written to | EEPROM memory is integrated onto the |
| (EEPROM) was not correctly verified | microcontroller so this should be unlikely. |
| as part of error checking. | Replace the controller. |
|
| |
|
|
|
E02 | System read an | |
| temperature value when retrieving bake | Any value above 250 C will cause this |
| error. Indicated corruption of data. | |
| data from EEPROM. | Reset back temperature to below |
|
| |
|
| 480 F/250 C. |
|
|
|
E03 | Thermocouple open circuit | Thermocouple or thermocouple wiring is |
|
| bad. |
|
| Check the thermocouple wiring. Replace |
|
| as necessary |
|
|
|
Belshaw Bros., Inc. 1750 22nd Ave. S. Seattle, WA 98144 Phone
BX Classic Oven | 9 |
