Belshaw Brothers BX Classic Maintenance, Lubrication, Make sure water does not enter the control

WARNING

Make sure water does not enter the control

panel or rear access panel.

WARNING

Do not remove the rear paneling inside the

oven. This allows access to the fan assembly and could cause injury.

Maintenance

šCheck for frayed or bare cables. The machine must not be used if there are frayed or bare cables.

šFollow cleaning instructions exactly.

šCheck condition of the rubber door seal. Repair or replace if necessary.

šIf the light bulb burns out, use the following instructions to replace it.

a.Disconnect the oven from the main power supply and allow to cool.

b.Remove the glass front from the lamp unit.

c.Remove the bulb by unscrewing counterclockwise and replace with a new bulb.

d.Refit the glass front.

e.Reconnect the oven to the main power supply and test.

šIf the steaming operation deteriorates, clean the pipe aperture with a pin to remove any build-up.

Lubrication

This machine does not require special lubrication.

Belshaw Bros., Inc. š 1750 22nd Ave. S. š Seattle, WA 98144 š Phone 206-322-5474 š Fax 206-322- 5425

BX Classic Oven MN-1876EN 7