English
10. Initialize your TV
Press Power button on the remote control. the TV will turn on and the power indicator will light up blue. When first turned on (and until tuned), the Initial Menu will display:
Before you can use your TV to view TV programs, you need to let it search for and tune TV station programs appropriate to your region. This process only needs to be done when the TV is newly installed, or whenever you install it in OSD menu for convenience of operation.
1.When Language is highlighted, use the ◄ or ► buttons to select the language dis- played on the menu.
2.Press ▼ button to select Auto Tuning and press the OK button.
3.Press ◄ or ► to select the Country where you operate the TV, then select Start and press OK. The Auto Tuning automatically creates a list of receivable channels. Press the BACK button at any time to interrupt the memorization process. (The list cannot be created if interrupted)
11.View the TV programs
•Press PROG▲ or PROG▼ on the remote control to sequentially cycle through your TV channels.
•To select a single- or
•Press VOL
or VOL
on the remote control to increase volume. The volume indicator will increase in length as volume rises.
•Press Mute on the remote control to turn off the sound temporarily. Press Mute once more, or press VOL
or VOL
to restore the sound level.
•You can press RETURN on the remote control to quickly return to the previous viewed channel.
10 Section 1: Quick Start Guide
Downloaded From
