Remote control
1 | 4 |
| |
2 | 8 |
3 | 5 |
5 |
|
6 | 9 |
| 7 |
10 | 13 |
11 | 12 |
|
1. II POWER
Toggles the projector between standby mode and on. See "Starting up the projector" on page 20 and "Shutting down the projector" on page 32 for details.
PROJECTOR
2.FREEZE
Freezes the projected image. See "Freezing the image" on page 30 for details.
3.AUTO
Automatically determines the best picture timings for the displayed image. See
4.BLANK
Used to hide the screen picture. See "Hiding the image" on page 30 for details.
5.Volume/Arrow keys ( 
/-,
/+) Magnifies or reduces the volume level. See "Adjusting the sound" on page 31 for details.
When the
6.MENU/EXIT
Turns on the
See "Using the menus" on page 21 for details.
7.Keystone/Arrow keys ( 
/
Up, 
/
Down)
Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 25 for details.
8.SOURCE
Displays the source selection bar. See "Switching input signal" on page 24 for details.
9.MODE/ENTER
Depending upon which input signal is selected, selects an available picture setup mode. See "Selecting a picture mode" on page 27 for details.
Enacts the selected
USB READER
10.SELECT/
Plays back and pauses the photo and movie. Enacts the selected USB On- Screen Display (OSD) menu item.
11.RETURN/ 
Stops playback. Goes back to USB Reader main screen.
12.Arrow keys (
/
/ 
/ 
)
Uses 
/ 
to play previous or next file.
Use 
/
to allow fast reverse play or fast forward play during playback. When the USB Reader
13.SETTING
Turns on the USB Reader
Introduction 11
