Safety Instructions (Continued)
11.Do not place this projector in any of the following environments.
-Space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls and free flow of air around the projector.
-Locations where temperatures may become excessively high, such as the inside of a car with all windows rolled up.
-Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shortening the projector's life span and darkening the image.
-Locations near fire alarms
-Locations with an ambient temperature above 60°C / 140°F
-Locations where the altitudes are higher than 12000 m (40000 feet).
12000 m
(40000 feet)
0m
(0 feet)
12.Do not block the ventilation holes.
-Do not place this projector on a blanket, bedding or any other soft surface.
-Do not cover this projector with a cloth or any other item.
-Do not place inflammables near the projector.
If the ventilation holes are seriously obstructed, overheating inside the projector may result in a fire.
13.Always place the projector on a level, horizontal surface during operation.
14.Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector.
Important safety instructions | 5 |
