Command Line Interface Does Not Work | Proxim CPN 63708 guide

Tsunami MP.11 Installation and Management

Command Line Interface Does Not Work

If you cannot connect to the MP.11 through the network:

1.Connect a computer to the serial port of the MP.11 and check the SNMP table. The SNMP table can restrict telnet or HTTP access. For more information, see “Serial Port” on page 22.

2.Open a command prompt window and enter: ping <ip address MP.11> (for example ping 10.0.0.1).

ºIf the MP.11 does not respond, ensure that you have the correct IP address.

ºIf the MP.11 responds, the Ethernet connection is working properly, continue with this procedure.

3.Ensure that you have not exceeded the maximum number of CLI sessions.

TFTP Server Does Not Work

With TFTP, you can transfer files to and from the MP.11. Also see “TFTP Server Setup” on page 64. If a TFTP server is not properly configured and running, you cannot upload and download files. The TFTP server:

▪

▪

▪

▪

Can be situated either local or remote. Must have a valid IP address.

Must be set for send and receive without time-out. Only must be running during file upload and download.

If TFTP server does not upload or download files, it could mean:

▪

▪

▪

▪

The TFTP server is not running.

The IP address of the TFTP server is invalid.

The upload or download directory is not correctly set. The file name is not correct.

Online Help Is Not Available

Online help does not appear when the ‘Question mark’ button is clicked in the Web Interface:

1.Make sure that the Help files are installed on your computer or server. Also see “Installing Documentation and Software”.

2.Verify if the path of the help files in the Web Interface refers to the correct directory. See “Help” on page 59.

Chapter 9. Troubleshooting	79
CPN 63708	Issue Date: 02/05/2003

Image 79

Proxim CPN 63708 manual Command Line Interface Does Not Work, Tftp Server Does Not Work, Online Help Is Not Available

Contents

Tsunami MP.11 Trademarks Copyright Contents Overview Point-to-Point Link Wireless Network Topologies Point-to-Multipoint Network Identifying Network Topology and Equipment InstallationFinding a Suitable Location Product Package Installation Installing the MP.11 Tsunami MP.11 Installation and Management Attaching a Kensington Security Lock Optional Blinking Green when Switching on the MP.11Power Ethernet Link Wireless Link Blinking Green when data sent Tftp server Installing Documentation and SoftwareOnline help Documentation ScanTool Desktop Mounting Mounting the MP.11Wall Mounting Tsunami MP.11 Installation and Management Ceiling Mounting MP.11 IP Address Management OverviewScanTool Static IP Address Static or Dynamic IP Address Dynamic IP Address with Dhcp WEB Interface Overview Ethernet Port Command Line Interface Overview Serial Port HyperTerminal Connection Properties Basic Management Click Commands Î Reboot Rebooting and ResettingRebooting Resetting Hardware System Status General SettingsSoft Reset to Factory Default Click Commands Î Reset System Configuration IP Address Assignment Type IP ConfigurationDescriptor Up Time Interfaces Wireless SlotDefault Router IP Address Default TTL Frequency Channel Interface TypeBase Station System Name Network Name Ethernet Port Wireless Monitoring Settings Show wif show worp show worpcfg Encryption Security Settings Using Snmp to Change Passwords PasswordsUsing Telnet to Change Passwords Using the Web Interface to Change Passwords Upgrading the MP.11 System Status Web InterfaceStatus Status tab shows the System Status and the System Traps Systems Traps ConfigureClick Configure Î System System Network IP ConfigurationDhcp Relay Agent IP Routing Ethernet Wireless Slot a Snmp Trap Host Table IP Access TableTelnet Trap Groups Time out Serial Radius Authentication MAC AuthenticationSecurity Encryption Filtering Ethernet Protocol Filtering Ethernet Protocol Filter Static MAC Pair Filtering Wired MAC AddressWired Mask Wireless MAC Address Spanning Tree Wireless MaskComment Ethernet Threshold Wireless ThresholdStorm Threshold Per Address Threshold Broadcast Protocol Filtering MonitorGeneral Worp Radius Icmp Per Station FeaturesLink Test IP ARP Table IP Routes Learn Table File Name CommandsDownload Server IP address Upload Reboot Help Reset Introduction Command Line InterfaceUsing Command Help Boot Loader Command Line Interface Entering Strings Show CommandSet Command Viewing and Changing Parameters Modifying a Table Entry Viewing Table ContentsWorking with Tables Creating a Table Row Enabling, Disabling, or Deleting a Table Row Modifying Several Table Entries Tftp Server Setup ProceduresProcedure Description Image File Download Click Commands Æ DownloadCLI Image File Download File Type Config File Operation Upload Configuration BackupCLI Configuration File Upload Click Commands Æ Upload CLI Configuration File Download Configuration RestoreFile Type Config File Operation Download Hard Reset to Factory Default Soft Reset to Factory DefaultCLI Soft Reset to Factory Defaults Forced Reload Image File Download with the Bootloader Command prompt is displayed enter the following commands Command Line Interface For example Hardware Specifications Specifications Channel Frequencies Radio SpecificationsChannel ID FCC/World Etsi GHz France Japan GHz LED Indicators Troubleshooting MP.11 Does Not Boot MP.11 Connectivity IssuesSerial Link Does Not Work HyperTerminal Connection Properties Ethernet Link does not work Setup and Configuration Web Interface Does Not Work Setup and ConfigurationLost the MP.11 Password MP.11 Responds Slowly Tftp Server Does Not Work Command Line Interface Does Not WorkOnline Help Is Not Available Changes Do Not Take Effect ARP Glossary Http Icmp WEP