Tsunami MP.11 Installation and Management
Chapter 4. Basic Management
This chapter describes the initial setup of the MP.11, which lets you set up and monitor the basic features of the MP.11. In most cases, setting up these basic features is sufficient.
A full overview of the Web Interface is provided in “Chapter 5. Web Interface” on page 37; “Glossary” on page 81 provides a brief explanation of the terms used.
The following topics are discussed in this chapter:
▪
▪
▪
▪
▪
Rebooting and Resetting on page 25
General Settings on page 26
Monitoring Settings on page 32
Security Settings on page 34
Upgrading the MP.11 on page 36
To use the Web Interface for configuration and management, you must access the MP.11. With ScanTool you can determine the unit’s current IP address. Then enter http://<ip address> in your Web browser. See “Chapter 3. Management Overview” on page 17 for details.
The Web Interface consists of Web page buttons and tabs. A tab can also contain
The Web Interface also provides online help, which is stored on your computer (see “Installing Documentation and Software” on page 13 for details). Launch help by clicking the question mark button in the Web Interface.
Chapter 4. Basic Management | 24 |
CPN 63708 | Issue Date: 02/05/2003 |
