Proxim CPN 63708 manual Point-to-Multipoint Network

Tsunami MP.11 Installation and Management

Point-to-Multipoint Network

If you want to connect more than two buildings, you can set up a single Point-to-Multipoint network with a single Base interface and multiple Satellite interfaces, as depicted in the following figure.

In this figure, the system is designed as follows:

▪The central building b is equipped with a Base interface, connected to either an omni-directional, or a wide angle antenna.

▪The two other buildings a and c are both equipped with a Satellite interface connected to a directional antenna.

Chapter 1. Overview	6
CPN 63708	Issue Date: 02/05/2003