Tsunami MP.11 Installation and Management
The Base Station must not be configured at a higher data rate as any of the SUs, as the timeout of the Base Station is determined by its data rate. If one of the SUs has a lower data rate than the Base Station, it causes a timeout on all the longer data frames. It is okay if some (nearby) SUs are at a higher data rate than the Base Station.
4) SNMP
Click Configure Î SNMP to set passwords, set trap host IP addresses, and limit access to the MP.11 management interface. You can enable: All Interfaces, Only Ethernet, Only Slot A, or None.
Chapter 5. Web Interface | 42 |
CPN 63708 | Issue Date: 02/05/2003 |
