Tsunami MP.11 Installation and Management
Chapter 7. Procedures
This chapter contains a set of procedures, as described in the following table:
Procedure | Description |
|
|
TFTP Server Setup | Prepares the TFTP server for transferring files to and from the |
| MP.11. This procedure is used by the other procedures that transfer |
| files. |
|
|
Image File Download | Upgrades the embedded software. |
|
|
Configuration Backup | Saves the configuration of the MP.11. |
|
|
Configuration Restore | Restores a previous configuration through configuration file |
| download. |
|
|
Soft Reset to Factory | Resets the MP.11 to the factory default settings through the Web or |
Default | Command Line Interface. |
|
|
Hard Reset to Factory | In some cases, it may be necessary to revert to the factory default |
Default | settings (for example, if you cannot access the MP.11 or you lost the |
| password for the Web Interface. |
|
|
Force Reload | Completely resets the MP.11 and erases the embedded software. |
| Use this procedure only as a last resort if the MP.11 does not boot |
| and the “Hard Reset to Factory Default” procedure did not help. If |
| you perform a “Forced Reload,” you must download a new image file |
| as described in “Image File Download with the Boot Loader.” |
|
|
Image File Download | If the MP.11 does not contain embedded software, or the embedded |
with the Boot Loader | software is corrupt, you can use this procedure to download a new |
| image file. |
|
|
TFTP SERVER SETUP
To download or upload a file, you must connect to the computer with the TFTP server through the MP.11’s Ethernet port. This can be any computer in the network or a computer connected to the MP.11 with a
Ensure that the upload or download directory is correctly set, the required file is present in the directory, and the TFTP server is running. The TFTP server must be running only during file upload and download. You can check the connectivity between the MP.11 and the TFTP server by pinging the MP.11 from the computer that hosts the TFTP server. The ping program should show replies from the MP.11.
Chapter 7. Procedures | 64 |
CPN 63708 | Issue Date: 02/05/2003 |
